saleen367
Well-Known Member
- Thread starter
- #1
I have an Xineering Auto-Blip Module for sale $395 $370 shipped
This kit supports 2011+ Ford Mustang & Shelby GT350 GT500 per their website.
Used 1 season on my 2018 PP2 - only 1 track day. I'm selling the car and no longer have a use for it.
It works excellent for those who have a hard time mastering the heel/toe or someone who wants one less thing to think about it. It was instrumental in cutting my laps times. You just switch it on before leaving the pit area and switch back off entering the pits.
Its also fully programmable;
Target Throttle Blip %
Delay after trigger for blip (ms)
Duration of blip (ms)
Clutch Pos %
Min. time between blips (ms)
This unit was purchased in 2021 and there is a new upgrade to full plug and play for an additional $100. The only difference is this unit uses 2 posi-taps for the brake signal and power, which is pretty straight forward. I've also added a lighted switch which can easily be mounted (I left a few loops of wire) or stored in the glove box with the module.
These are $520 new, $620 complete plug and play. This unit for sale is everything you'd get for $520 plus the lighted switch is wired and included.
https://www.xineering.com/downloads/Blip_S550_PNP100 REV.pdf
stock photo:
This kit supports 2011+ Ford Mustang & Shelby GT350 GT500 per their website.
Used 1 season on my 2018 PP2 - only 1 track day. I'm selling the car and no longer have a use for it.
It works excellent for those who have a hard time mastering the heel/toe or someone who wants one less thing to think about it. It was instrumental in cutting my laps times. You just switch it on before leaving the pit area and switch back off entering the pits.
Its also fully programmable;
Target Throttle Blip %
Delay after trigger for blip (ms)
Duration of blip (ms)
Clutch Pos %
Min. time between blips (ms)
This unit was purchased in 2021 and there is a new upgrade to full plug and play for an additional $100. The only difference is this unit uses 2 posi-taps for the brake signal and power, which is pretty straight forward. I've also added a lighted switch which can easily be mounted (I left a few loops of wire) or stored in the glove box with the module.
These are $520 new, $620 complete plug and play. This unit for sale is everything you'd get for $520 plus the lighted switch is wired and included.
https://www.xineering.com/downloads/Blip_S550_PNP100 REV.pdf
stock photo:
Sponsored
Last edited: