WTB Exhaust reducer

[THELASTVENDETTA]

I am looking for two 2.5in to a 2.25in reducers. Im putting a GT350 catback on a 5.0 and trying not to have to take it to an exhaust shop.

Sponsored

 

[Synyster06Gates]

I am looking for two 2.5in to a 2.25in reducers. Im putting a GT350 catback on a 5.0 and trying not to have to take it to an exhaust shop.

You can get reducers at Advance/Oreilly/Autozone, however you will be adding 1.5-2'' of OAL to the midpipe (unless you have a Corsa midpipe). I did the same thing with Magnaflow and just had the shop weld the reducers on. I did the rest of the install at home.

 

[randotheking]

You're in luck. I'm selling some Vibrant Resonators (Model 1792) resonators, brand new never used. They sell for $50 each, I'll sell the pair for $75 + $10 shipping. Here's my craigslist post

https://cincinnati.craigslist.org/pts/6158541373.html

 

[THELASTVENDETTA]

You can get reducers at Advance/Oreilly/Autozone, however you will be adding 1.5-2'' of OAL to the midpipe (unless you have a Corsa midpipe). I did the same thing with Magnaflow and just had the shop weld the reducers on. I did the rest of the install at home.

Yeah I guess I will have to do that. Did you have them cut down the x pipe on the magnaflow in order to have it the same length when the reducers are welded in?

 

[Synyster06Gates]

Yeah I guess I will have to do that. Did you have them cut down the x pipe on the magnaflow in order to have it the same length when the reducers are welded in?

Had them cut the 2.5" leads off and make sure OAL was the same after the reducers were on

 

[THELASTVENDETTA]

Had them cut the 2.5" leads off and make sure OAL was the same after the reducers were on

I bought some reducers offline. Im gonna try clamping them first before I resort to welding. Just in case wanna go long tubes in the future.

Sponsored