Who needs a FL2087 oil filter? Act Fast

[Tomster]

Same story here. The mythical 2087 does exist!!

Thanks again @Tomster

I opened mine and it has no O rings. Anyone else?

Edit:

I see that is the case with everyone else. I don't see why you cant use your old O rings. They can be bought separately for about $1.00 from ford, so I read.

Sponsored

 

[dpAtlanta]

I currently have 3... one from a friend, and two from South Bay Ford that just arrived. The ones from South Bay did not include O-rings. If desperate for a filter and you meet Tomster's criteria, PM me and I can help.

Just helping fellow GT350 owners/members.

 

[pilotgore]

I opened mine and it has no O rings. Anyone else?

Edit:

I see that is the case with everyone else. I don't see why you cant use your old O rings. They can be bought separately for about $1.00 from ford, so I read.

Keep in mind I’ve done 16 oil changes on my car in 8,400 miles, and I reused the orings once and will never do it again. I’m not saying this will be everyone’s experience….. The one time I reused orings, after a track weekend I noticed I had some oil leaking out from the oil filter housing. It’s wasn’t what I would call significant, but it certainly wasn’t just one or two drops. When I removed the housing, the orings seemed very loose and were easily removed by hand. In my experience the oil filter housing orings don’t have the same elasticity as other orings I regularly come into contact with.

Most other orings I reuse all day long as long as they’re in good condition…. But I’ll never reuse the oil filter housing ones ever again. YMMV

 

[GTthree50]

I opened mine and it has no O rings. Anyone else?

Edit:

I see that is the case with everyone else. I don't see why you cant use your old O rings. They can be bought separately for about $1.00 from ford, so I read.

Same here, just picked mine up off the front porch, so happy that I have them but yes mine are missing O-Rings too. Considering the risk we are aware of using the earlier filters I had a couple I was going to use so that will be my O-Ring source for these 2 filters I got today.

 

[dbtgt]

I received my filters from South Bay Ford today.
As with others here on the forum - no O rings included.
Thanks again and greatly appreciated, Tom!

 

[Tomster]

I really don't think that the O rings are a mandatory replacement. Each time I chuck them, they are perfectly fine. I will look at the service manual and see what it says later.

 

[pilotgore]

See attached.

edited to add the second photo showing the warning on the next page.

 

[dpAtlanta]

YMMV

You Make Me Vomit...........????????????????

 

[pilotgore]

You Make Me Vomit...........????????????????

Your Mother Might Vote…… obviously!!!

 

[HEP#15]

I received my filters from South Bay Ford today.
As with others here on the forum - no O rings included.
Thanks again and greatly appreciated, Tom!

I received mine today and also no o-rings. I called and the guy that answered said they went through all the remaining inventory and none of them have o-rings. The guy to contact is out until Thursday so he said call back then.......which I will do and post an update.

 

[Jbraun2828]

I’ve done multiple oil changes and have never replaced the o rings. I’ve not had any issues in my experience

 

[svtdoug]

FYI, on the SouthBay website for the filter, it does state that O-rings sold separately. Question is, why would Ford sell them that way?

 

[nmp1]

FYI, on the SouthBay website for the filter, it does state that O-rings sold separately. Question is, why would Ford sell them that way?

thats ridiculous. whats next, is ford going to start selling spin on filters with no gasket?

 

[SmokinAces]

All things considered, that’s fine. I just needed the part# for the o ring so I can order some. Thnx @svtdoug

 

[Bdubbs]

Just ordered 2.

Sponsored