Whipple Gen2 3.25 pulley and MS109 = 793whp

[RockStang]

This is STD correction not SAE. went 9.82 when it put down 750/575 on the same dyno so we'll see what it does with a little more. Did another pull and it was 787/608. Was kind of expecting more but whatever. Weather wasn't ideal either. So 2 pulley sizes down netted 40ish hp. I always forget to add that this is 4th gear.

[ame]

Sponsored

 

[F1scamp]

Sick. Stock fuel system other than the BAP? You should buy a gen3 and dyno it with the same pulley, I will put a dollar towards the cost!

 

[RockStang]

Sick. Stock fuel system other than the BAP? You should buy a gen3 and dyno it with the same pulley, I will put a dollar towards the cost!

Yeah, still the same fuel system as before. BAP with 72 injectors. Thinking about the Gen 3 upgrade but I'm just not seeing the results worthy of it yet. would be an interesting comparison for sure.

 

[Tommy V]

Yeah, still the same fuel system as before. BAP with 72 injectors. Thinking about the Gen 3 upgrade but I'm just not seeing the results worthy of it yet. would be an interesting comparison for sure.

Yea u me made lose another $20 dollars lol.

 

[SVT-DADDY]

Nice numbers!

What wheels are those? They look like Foundry's but fill out the wheel well much better!

 

[RockStang]

Nice numbers!

What wheels are those? They look like Foundry's but fill out the wheel well much better!

Thanks! Those are Velgen VMB6s in 20x10.5 rear and 20x9 front that I had done custom with a Mirror cut face and gunmetal powder coat in the windows. I loved the Foundry wheels so I was trying to get something very similar.

 

[Whipple SC]

Your power is falling off after 7500, these climb to 8200rpm so I'm curious what your timing is doing and cam schedule.

 

[DavidHuff]

Stock Motor? WOW

 

[RockStang]

Your power is falling off after 7500, these climb to 8200rpm so I'm curious what your timing is doing and cam schedule.

I sent the logs to Ken so we'll see if he feels there is something missing. I sure would love it to make more power out further but the thing is hauling A$$ in the quarter mile none the less.

 

[RockStang]

Stock Motor? WOW

Yep. Still stock internals. Just OPG and CG.

 

[205.0]

Yep. Still stock internals. Just OPG and CG.

How much on average does ms109 pick up over 93? About to get mine tuned for it

 

[F1scamp]

Your power is falling off after 7500, these climb to 8200rpm so I'm curious what your timing is doing and cam schedule.

The guy makes 793whp... double? factory hp and Whipple's like blah, it should have made more... :cheers: Screw the 60's and 70's, awesome times we are in!

 

[5.O]

Good stuff man!

I'm so close on ordering a 3.25 and wondering how much boost you seeing?

 

[Tommy V]

The guy makes 793whp... double? factory hp and Whipple's like blah, it should have made more... :cheers: Screw the 60's and 70's, awesome times we are in!

That's cause the bragging about 800 on 93 and u have one of the best tuners out their tuning this car to 800 rwhp on MS109 and a 3.2 pulley,in which they did it on a 3.5 pulley.Joes car is FAST!!!!!.I WOULD like to see that 800 hp.car on 93 line up against Joe's car in the quarter,no where my money would be.800 on 93,love tp.see how long that motor last.

 

[RockStang]

Good stuff man!

I'm so close on ordering a 3.25 and wondering how much boost you seeing?

15ish.

Sponsored