What did you do to your S550 Mustang today?!

[Biggsy]

Parts required? Or how do people go about?

A lot of people use the GM GTO clutch reservoir which is what I used. Picked up an auto brake master cylinder from a local junkyard(roughly $40). Made my own bracket (some zip tie to brake reservoir). Got EPDM hose for clutch reservoir. Filled clutch with factory LV fluid and brake with Motul 600 for track days.Good way to save clutch master cylinder and keep brake fluid cleaner

Here is one thread of a few in here
https://www.mustang6g.com/forums/threads/remote-clutch-fluid-reservoir.119792/

Here is one in a different forum
https://trackmustangsonline.com/threads/seperate-clutch-fluid-reservoir.12870/

GM GTO*

Sponsored

 

[Bit_the_Bullitt]

Bring your stang to work day!

Hey, that's every day! ;)

 

[Bit_the_Bullitt]

I need to get 1 of these ... getting sick of dust on the car even though it's in the garage. Nice Duc in the back btw ... just picked up a 2019 Scrambler Icon.

Didn't all Bullitts come with one as standard?

 

[19VelocityBlueGt]

I’ve given it a lot of thought.. Best way to remove the factory bottle neck in my 3 inch exhaust system. I’ll be removing the bottle neck in my exhaust today, since I installed some more restrictive mufflers(gt500). With the most visual pleasing/cheapest way I have came up with…Figured this would give up some flow that the mufflers took away!! So far this exhaust has turned out better sounding than I could have hoped for!! It’s the perfect tone/volume I have heard with long tubes on these cars.. Lots of fab work tho. Doing it myself with my badass little titanium mig welder..

 

[Gnatsum21]

Inside and outside cleaning, the whole enchilada.

 

[StangTime]

Inside and outside cleaning, the whole enchilada.

I love the orange accent stitching.

 

[Gnatsum21]

I love the orange accent stitching.

Thank you! did it myself

 

[VIPR01]

Learned this life Mustang lesson a few years ago, buddy just joined the reverse lockout broken club… and I was able to listen to him curse Ford for 30m trying to pull the trim without breaking tabs & question why Ford would use plastic… Great start to the weekend

 

[GT Pony]

washed the bird poop off for the 100000th time... we have this little bird that will sit on my and wifes side view mirrors... bounce up/down and shit all over it... its both mirrors on both cars several times a day.... this fucking bird... wifes car... but its like this on both... all the time.

I'm trying to envision some "bird spikes" mounted on top of the mirrors.

https://www.amazon.com/Yunoun-Flexible-Stainless-Spikes-Plastic/dp/B07WYHPLB6

 

[TrackMustang]

Wasted an hour checking CJ Pony Parts and American Muscle for Memorial Day pricing on the Ford Performance front Brembo upgrade kit. No joy. Still priced at $1,385.

The Steeda kit is $1199 now…

 

[SVTchris]

Didn't all Bullitts come with one as standard?

Car cover with the Bullitt logo was an option for Bullitts.

 

[ArtieTheOneManParty]

Funny, my Mustang also shares the garage with a Multistrada...

Put on my Coverking moda stretch car cover:

 

[Headless Horseman]

Steeda Stop The Hop Enthusiasts kit, Vertical Links, QA-1 Carbon Fiber Driveshaft, BMR Street K-member, alignment. Replaced active exhaust valve. Ordered 2 new front tires. Was educated on Toe links and Camber plates, will be replacing those and realigning it again in a month.

 

[The Demon]

Saw this SVO pulling out and gave him props before pic. Very clean.

 

[TrackMustang]

Installed my Brembos. Finally.

The threads on the bolt from the brake hardline to the new steel braided lines I installed were marred from the factory (passenger side required a wrench for the entire process, driver side I used a wrench to loosen it and it spun free the rest of the way). It wouldn’t seat into the braided line, so once I realized what happened I had to hold the fluid from dumping out and hold the bolt while I filed it back to working order… An hour job turned into a three hour job.

Sponsored