What did you do to your S550 Mustang today?!

[Briebee72]

It's a little hard to tell in the picture, but there's actually plenty of airflow around the gauges. Each one is held in place by four set screws threaded through the vent housing. I got the idea from seeing the Roush gauge pod that they want fifty bucks each for.

Oh so there is stil air.. cool. Nice set up

Sponsored

 

[StangTime]

It's a little hard to tell in the picture, but there's actually plenty of airflow around the gauges. Each one is held in place by four set screws threaded through the vent housing. I got the idea from seeing the Roush gauge pod that they want fifty bucks each for.

Looks great! I am not even going to ask how much that steering wheel cost.

 

[m3incorp]

PPF, ceramic coating, and window tint complete. Pick it up tomorrow.

 

[Crowd Hunter]

Put in a carbon fiber steering wheel.

Which steering wheel is that?

 

[WildHorse]

Why spend 2-300$ when 25$ will get the same thing done. 3 lbs, 7 ounce total weight.

 

[Farkel]

Went for a drive in the twisties going up to Virginia City, NV

 

[Joe B.]

I get a little carried away when I rotate the tires, right down to buffing the lug nuts, on my 17k mi. daily cruiser, but hey, it's only once a year, so nice to detail everything.
Got to try my BMR jacking rails(nice), and those Reverse Logic threaded rods make wheel off and on a cinch without back strain or damaging caliper paint.

 

[GMB Racing]

do you have a link for those wheel stud extenders?

 

[m3incorp]

They look like Race Logic and used for making tire mounting easier.

do you have a link for those wheel stud extenders?

 

[Linkster1666]

Since it's not getting below 85F at night, she got a good dry bath, no pics this time.

 

[Joe B.]

do you have a link for those wheel stud extenders?

https://reverselogic.us/lug-guides/

 

[m3incorp]

I meant Reverse Logic above. These are great. I don't really need them for the Mustang but lift a 20x12" wheel with 335/25R20 tires and they make life a whole lot easier.

https://reverselogic.us/lug-guides/

 

[PKs]

https://reverselogic.us/lug-guides/

So these just screw onto your studs? Do you know what size the mustang studs are? Thanks

 

[m3incorp]

I think they are 14mm with 1.50 pitch.

So these just screw onto your studs? Do you know what size the mustang studs are? Thanks

 

[m3incorp]

If you order, buy at least 2. On the Corvette many people will buy 3 because of the weight. Breaking loose that 150 ft lb torque on the lugs can be a pain without some kind of leveraging bar.

Sponsored