What did you do to your S550 Mustang today?!

[m3incorp]

Looks great. If you didn't get the leading edge of the roof done, I would highly advise it.

Had PPF on the front, A pillar, rockers, behind the rear tires. Then full ceramic and 35% tint.

Sponsored

 

[m3incorp]

Looks great and those exhaust tips are definitely shining.

Windows tinted Monday. Added knock-off 50th Anniversary polished window trim today. Not for everyone, but it’s deff for me.

 

[Bikeman315]

Looks great. If you didn't get the leading edge of the roof done, I would highly advise it.

That is usually part of the "A" pillars. About 6" worth I think. My guy ordered that but got the whole roof so he did it for me at no extra charge.

 

[JnBama]

My 17 GT Premium replaced scratched GT decklid emblem , sanded and touched up scraped left side rims. While out doing errands punched it on clear county road got up to 120 the fasted I've ever been Magnaflow sound is awesome !

 

[m3incorp]

I think it depends on the shop. Great deal you got.

That is usually part of the "A" pillars. About 6" worth I think. My guy ordered that but got the whole roof so he did it for me at no extra charge.

 

[Virnman]

Installed a Speedform lip + MP Concept hood vents. Then added a J & L oil separator. Finally took off my front plate! Now the fun part…filling/sanding those ugly holes & respraying the bump. Maybe this weekend.

 

[Bit_the_Bullitt]

That is usually part of the "A" pillars. About 6" worth I think. My guy ordered that but got the whole roof so he did it for me at no extra charge.

I think it depends on the shop. Great deal you got.

Yup, shop dependent. I did mine at Pristine Auto in Indy and the A-pillar and "leading edge of the roof" is like others said about 6" onto the roof. I had a big rock chip the edge of the roof right above the windshield. Strangely, the "leading edge of the roof" film actually does not cover the leading edge, it starts right at the tip of it.
The shop said they get that film measurement from Xpel and he'll let them know my suggestion of wrapping the film between the roof and windshield.

 

[StangTime]

Installed a Speedform lip + MP Concept hood vents. Then added a J & L oil separator. Finally took off my front plate! Now the fun part…filling/sanding those ugly holes & respraying the bump. Maybe this weekend.

@Virnman You can buy hole plugs that will look almost invisible. https://bumperplugs.com/bumperplugs/bumperplugs-for-ford
Might be an easier and cheaper option that going through all that work.

 

[Mhanna5]

I live about 20min away from them and my closest dealer is not really something I enjoy any longer. Looking at the overall responses from you guys, I think I'm going to take my Bullitt there from now on...

I'm setting up an appointment for the Roush stage 2 as well. So far, messaging over FB they've been very responsive and helpful.

 

[Doolin64]

Had PPF on the front, A pillar, rockers, behind the rear tires. Then full ceramic and 35% tint.

Looks great! What flares are you running?

 

[Mike Pfeifer]

Installed a Speedform lip + MP Concept hood vents. Then added a J & L oil separator. Finally took off my front plate! Now the fun part…filling/sanding those ugly holes & respraying the bump. Maybe this weekend.

How was that lip to put on?

 

[Virnman]

How was that lip to put on?

It wasn’t too bad actually. I jacked up the car then used cardboard boxes on each side to hold up the new lip. Then I started attaching in the middle & worked myself out to the ends. Maybe took 10-15 mins.

 

[Virnman]

@Virnman You can buy hole plugs that will look almost invisible. https://bumperplugs.com/bumperplugs/bumperplugs-for-ford
Might be an easier and cheaper option that going through all that work.

Wow those are really cool. Def easier option for sure. In my case I have no excuse! I own a bumper repair company

 

[StangTime]

Wow those are really cool. Def easier option for sure. In my case I have no excuse! I own a bumper repair company

Well you're all set then!

 

[Virnman]

Well you're all set then!

Yes. My local Cars & Coffee is doing Mustang Day on April 16th. Gotta get her done.

Sponsored