What did you do to your S550 Mustang today?!

[Stang55]

And in the US you can get it covered under the safty and restraints warranty for 5 years or 60k miles what ever comes first.

I have a 7 year 70,000 mile warranty from Earnhardt Ford, but I work overseas soo..... lol gotta make due with the situation haha

Sponsored

 

[Rapid Red]

Go ahead lol, I'll even attach the TSB for it. Good luck!

Looking the PN up 2015-2018, seriously doubt there would be a difference in the cable for a 2020

Thanks for the reply

 

[fmc_smt]

Looking the PN up 2015-2018, seriously doubt there would be a difference in the cable for a 2020

Thanks for the reply

If you have a 20 most likely it is the camera itself . Known issue on all 20 Ford products .

 

[Arknsawchuck]

And more pix, because I want too.

My googling has led me to believe that this is the CDC OUTLAW rear spoiler...
what do y’all think?

https://www.americanmuscle.com/cdc-outlaw-rear-spoiler-2015.html?utm_content=Exterior - Spoiler|CDC&T5_Var4=389058&utm_source=google-pla&utm_medium=shopping&T5_Var2=shopping&utm_campaign=AMM+Mustang+Brands+Medium&T5_Var3=blue&intl=0&dialogtech=ppc&gclid=CjwKCAiAwrf-BRA9EiwAUWwKXvZH8dfjgr3Osn3xOQ0rmiS4S83QP2NwWayACDyknVi03vh2Akx8BBoCh-EQAvD_BwE&gclsrc=aw.ds

And ps the guy before me really liked the red accents/red tape.
but one cool thing he did was placing just the red pieces on the right side only of the rear GT logo.
so you can only see the red if looking at it that way.

Car looks great, but those tail lights..yuk. I just don't get why they are even made. Oh well to each his own.

 

[Arknsawchuck]

Stock are pretty worthless, they weigh a few ounces and the magnets are about the size of a quarter. Replace them and they sound great.

Do you know of any bolt in replacements. With my limited searching I've only found replacements that involve cutting or drilling to mount them.

 

[S550_Newbie]

Just curious, what type suspension retrofits were you able to do with the car on the cribbing?

I was able to do the exhaust system, adjust my sway bar end links to take preload off of them, relax bushings after installing the lowering springs and install the extreme G-Track brace from Steeda. Most of my other suspension mods had to be done on jack stands because the wheels have to come off.

 

[S550_Newbie]

Looking the PN up 2015-2018, seriously doubt there would be a difference in the cable for a 2020

Thanks for the reply

I would make sure, when installing my ignition switch remote power on for my amplifier I discovered the passenger kick panel breaker box is not the same as previous years and the includes the 2019.

 

[S550_Newbie]

Do you know of any bolt in replacements. With my limited searching I've only found replacements that involve cutting or drilling to mount them.

I bought these and they sound great but there are a lot of choices of drop ins. https://www.crutchfield.com/p_108R6532EM/Infinity-Reference-REF-6532ex.html?l=E
Enter your car and year information on the Crutchfield site and they will show you everything that fits properly without any modifications.

 

[StangTime]

Finally got my Ford Perf. catch can installed. Bought used. The seller unknowingly left the mounting stud on the car he sold. So I was left trying to find a replacement. After searching and obtaining an actual part#, I was going to get from Tasca but they wanted $20 to mail a $2 part. My local dealer was going to take weeks to get one. Then I had an epiphany. I remembered seeing these studs on the valve covers for holding the wiring harness. I found one stud that wasn't being used at the front of the passenger valve cover, swapped it with the valve cover bolt that gets removed to install the bracket and bingo, problem solved.

The stud that was here was swapped for the bolt shown to install the bracket.

Valve stud in it's new home being used to attach the bracket with a new locknut.

The install of the bracket calls for pulling a wire harness anchor from a stud by the valve head, removing a nut, installing the bracket, and using the nut to secure. The thickness of the bracket in place makes this stud too short to press the wire harness anchor back into place. So I used a wire tie to secure it.

Now complete!

Next is to trim the engine cover down and do some paint work on it.

 

[gadgtfreek]

Installed an eight ball looking steeda shift knob on the manual transmission.

 

[Rapid Red]

I would make sure, when installing my ignition switch remote power on for my amplifier I discovered the passenger kick panel breaker box is not the same as previous years and the includes the 2019.

I'm not thinking their will be any difference, 2018 to present. See you live in GA . I'll bet you beer and drive over to collect my winnings LOL

 

[oneheadlite]

...moved it out of the way to
get a Harley out to ride...............

 

[Mr. Met]

Finally installed Velossa Tech big mouth. Cutout the back of the grille. I made a mess of the other side but looks pretty good from the front.

 

[CJJon]

Took out the back seat to get ready to install a Watson roll cage.

Getting prepped for the Whipple install and added these to replace the one hanging on the left which left marks all over the finish. Would love a jacket made out of this stuff! Super supple and soft. Matches the color of the car well too. Has some magnets and hooks on elastic.

Murphy approves:

Sponsored