What did you do to your Mach 1 today

[JetGray_Mach1]

@JetGray_Mach1 I'm jealous of your quick jack. What’s it like with the hoses, are they in the way at all

Its pretty awesome, it goes up so high. I recommend if you get it you take your time with the thread sealant tape, I have no leaks works great. The hoses are not in the way at all, you can just disconnect them if you want after you lift the car. I have some 6TON jacks under the car too, feel totally safe although the jacks are not needed.

Sponsored

 

[TrackMeisterWannabe]

It didn’t seem like I did need the flap since I’m rocksolid in the corners. I have Steeda’s adjustable sway bars with a Steeda dual rate magna ride Springs and the magna ride controller. Stop the hop kit road course edition, and camber arms and plates. I am at the stiffest on the rear bar and the second from the softest on the front bar. She rotates well but I would prefer her to be a bit more loose. I am running what Steeda recommends for track settings -3° in the front and -2° in the back for Camber about 2 1/2 to 3° tow in for the rear and about a half a degree toe out on the front tires. It must be working well because I had lots of guys coming up to ask me what kind of tire I was running and all about the car.

Great info. Wish I could have made it up. Did you get your new brake pads installed? Thoughts?

 

[DadzMach]

Over the weekend I had all my Steeda parts installed. I did their two way Magnaride Shocks, the Differential kit to lock into place, the Stop the Hop Kit, Camber Plates and Adjustable Rear Suspension pieces so I could get the perfect alignment. I also did the GTEK Braces, and the jacking rails as well as the MMR piece that bolts your trans and block together to help avoid cracks. I am also thinking about getting the Steeda Magnaride Program but I’m going to wait and see how I like it as is and if I can ever drive someone else’s to see. Anyway, here are some photos of everything.

 

[mustang5o]

This one from Autozone

and this to store

I also just bought a new plastic drain plug, they are cheap rather change to a new one each time.

Already have the black one but I might give that Less Mess pan a try. Although I've tried so many different ways and I always seem to end up with a little mess. I usually pour from the drain pan back into the empty containers and then just drop those off for recycling the oil. When pouring into the funnel that goes in the empty containers that Less Mess option might be helpful there as well.

 

[cerbomark]

Man I would eat a pizza and a ice cold beer on that awesome garage floor as I worked on my car.

LOL, Looks like same floor!!

 

[IanKar]

Took mine to the local track. I would hate to have this come up on my tail...

 

[DadzMach]

Took mine to the local track. I would hate to have this come up on my tail...

That is a person doing something that makes all the other crap in our lives disappear! It’s the times like this I live for!

 

[zstanny]

MRT H Pipe went on yesterday. Short clip in traffic. Sport mode is a very glorious note. After 5K RPM or so, it sounds pretty much like before.

 

[IanKar]

1st the front driver side hub and a few weeks later the "Tire Pressure Monitor Fault" came up? Back at the dealer today. Need it for Oregon Raceway next week!

 

[BabyDoc1012]

Traded my 19 GT for this..

it was a left over 22, only 45 miles. 600A, 6spd, recaros. Got it for invoice. My 19 was an auto, so glad to be back in a 6spd!
Question, what’s the best way to get the owners kit? I don’t trust the dealer to submit the paperwork. LOL

 

[DadzMach]

Traded my 19 GT for this..

it was a left over 22, only 45 miles. 600A, 6spd, recaros. Got it for invoice. My 19 was an auto, so glad to be back in a 6spd!
Question, what’s the best way to get the owners kit? I don’t trust the dealer to submit the paperwork. LOL

Congratulations! Enjoy it, they are lots of fun. As far as the owners kit, it will take a little time. Once Ford sells the car then the one (1) person who does all the kits is notified and she puts them together and sends them out. People with 23’s are not getting them yet because she is finishing up the 22’s, so you will probably get yours before we get ours. Just enjoy the car and be safe!

 

[cerbomark]

Congratulations! Enjoy it, they are lots of fun. As far as the owners kit, it will take a little time. Once Ford sells the car then the one (1) person who does all the kits is notified and she puts them together and sends them out. People with 23’s are not getting them yet because she is finishing up the 22’s, so you will probably get yours before we get ours. Just enjoy the car and be safe!

sign up for the track attack too!!!!

 

[BabyDoc1012]

sign up for the track attack too!!!!

I definitely will! I think I will take my son and pay for the non-driver package for him

 

[DadzMach]

I definitely will! I think I will take my son and pay for the non-driver package for him

I haven’t signed up yet. I will as soon as I am able. I did the Boss 302 class 3 times though. It will be amazing to do it in the Mach as well, I’m certain.

 

[RobZ71LM7]

Traded my 19 GT for this..

it was a left over 22, only 45 miles. 600A, 6spd, recaros. Got it for invoice. My 19 was an auto, so glad to be back in a 6spd!
Question, what’s the best way to get the owners kit? I don’t trust the dealer to submit the paperwork. LOL

600A, 6-speed, non-HP and Recaro's... that is the perfect base for a track car build. Everything you need and nothing extra that you'd change out anyways.

Sponsored