What did you do to your GT350 today?

[V8 Voodoo]

Few little things before she goes into storage in a few weeks. Tail light replacement, side markers replacement and heat shrink around the washer fluid filler neck.

I've been going back and forth about swapping out the tail lights for these. Your pictures I think just convinced me to do the swap, especially with the side markers!

Sponsored

 

[stanglife]

https://www.amazon.com/FIA-VS301-Un...eywords=big+screen+car&qid=1603378460&sr=8-44

 

[Thuglike]

Well, I put new shoes on her....

Project 6gr 19" in Satin Graphite wrapped in Hankook EVO2..
305/30..FRONT
325/30..REAR

 

[torque124]

Well, I put new shoes on her....

Project 6gr 19" in Satin Graphite wrapped in Hankook EVO2..
305/30..FRONT
325/30..REAR

On my 16 track pack I also installed Project 6GR wheels, and I was pretty happy with them... but I think 305 / 325 is too wide... Also the red does not match the grey, I would have left the Ford center caps... (EDIT: I forgot I had some Snake caps stickers bought on Ebay in fact) here is my track pack with Project 6Gr wheels and stock supersport tires on it:

 

[Thuglike]

I agree with the caps...I have stickers coming....black with silver cobra..I wanted to like the red but don't. Easy change.

 

[mrbillwot]

On my 16 track pack I also installed Project 6GR wheels, and I was pretty happy with them... but I think 305 / 325 is too wide... Also the red does not match the grey, I would have left the Ford center caps... (EDIT: I forgot I had some Snake caps stickers bought on Ebay in fact) here is my track pack with Project 6Gr wheels and stock supersport tires on it:

What wheel specifics did you go with? I checked our old private msg thread and didn't see what you ended up with specifically.

Not sure where you are in Mass but I had a great fall drive today up around Carlisle Billerica Chelmsford Burlington then Lexington/Arlington for a manual car wash & home for Optimum Instant spray detail at dusk. If only all fall & winter was like this & last Thursday.

 

[Decanes]

Nothing wife still has not bought me one

 

[Lorne34]

If the man wants to spend his currency on a bug net, let him spend his currency on a bug net.

.

 

[Spacebird]

Brought it back to the dealer. It’s been there for 57 days already, and after they failed to fix it the ‘first’ time it’s back for another attempt.

Snarky though my post may be, I LOVE this car. Ford and the dealer have tried earnestly. I just want my 8100 mile R fixed.

 

[ADDGAMER]

I've been going back and forth about swapping out the tail lights for these. Your pictures I think just convinced me to do the swap, especially with the side markers!

I was going back and forth as well on the change. I really put serious thought into going with the 18 and beyond angled tail lights but all the ones I saw that were smoked had extra wiring requirements and there was allot of feedback about leaking.... so I went with the same style, smoked, simple plug and play. Probably took me 30 minutes for both sides then another 15 minutes for the corner markers.

 

[V8 Voodoo]

I was going back and forth as well on the change. I really put serious thought into going with the 18 and beyond angled tail lights but all the ones I saw that were smoked had extra wiring requirements and there was allot of feedback about leaking.... so I went with the same style, smoked, simple plug and play. Probably took me 30 minutes for both sides then another 15 minutes for the corner markers.

Do you have a link for the tail lights and side markers?

 

[ADDGAMER]

Do you have a link for the tail lights and side markers?

https://www.cjponyparts.com/taillig...air-mustang-american-spec-2015-2020/p/TLL129/

https://www.cjponyparts.com/diode-d...-light-rear-pair-us-spec-2015-2020/p/SMLED-V/

 

[NoXiDe]

https://www.cjponyparts.com/taillig...air-mustang-american-spec-2015-2020/p/TLL129/

https://www.cjponyparts.com/diode-d...-light-rear-pair-us-spec-2015-2020/p/SMLED-V/

I'll add if you want the 18+ headlight euro style the link below will help with that:
https://www.s550euros.com/products/2018-style-clear-taillight

 

[Les]

I got a new Rupes BigFoot LHR21 MarkIII polishing machine yesterday. My old Rupes machine died last Monday. (4 years old and I’ve done approx 130 cars with it. Going to send it out to be repaired) I polished the Shelby with McKee’s Jeweling Wax. Very happy with the new machine and the results. Then I had to do the Roush. The HotRod and truck are next. Then back to customer cars.

 

[torque124]

What wheel specifics did you go with? I checked our old private msg thread and didn't see what you ended up with specifically.

Not sure where you are in Mass but I had a great fall drive today up around Carlisle Billerica Chelmsford Burlington then Lexington/Arlington for a manual car wash & home for Optimum Instant spray detail at dusk. If only all fall & winter was like this & last Thursday.

I am in Newton... I found the most satisfactory drives to be on the track ... I just did Palmer on Monday :

For street wheels ( I track my carbon wheels with SC2's ) I have the Signature SV501's; see an album here:

https://photos.app.goo.gl/QwcAgBGwam34pe519

Sponsored