Voodoo Swap In My 63.5 Falcon, almost done

[Racedeck]

I have a 2019 GT350R and inspired this build
It's been a long process but we are getting close to finalizing this build with my 63.5 falcon Voodoo Swap ( along with massive other mods, from cantilever suspension, widening track, widening body panels, metal flares, etc.. ), wheels are temp waiting on Forgelines. We opted to scrap the OEM ECU and are now building the Haltec ECU.. going well at a slow pace. Mike Maire engineered and fabbed all of the suspension and Tom Kirkham /Cubic Performance did the build and metal work as well.. both serious craftsman!
We retained the stock headers, dampeners, etc to eliminate added vibration issues,, we do still have some around 1700-2300rpm .. any tips? we managed to tune a lot out.

Sponsored

 

[Angrey]

Awesome. What's the curb weight all said and done. I bet that thing scoots.

 

[sabtaj1]

Holy bad *ss man. Looks amazing!!!! Great job!!!!

 

[svassh]

My intial reaction was 63 Falcon, why? But seeing the car that changed to WOW!

 

[Racedeck]

Awesome. What's the curb weight all said and done. I bet that thing scoots.

It should land around 2800-2900lbs - Tricky with all of the cage and suspension mods

 

[Racedeck]

My intial reaction was 63 Falcon, why? But seeing the car that changed to WOW!

Thanks.. we rolled the dice a bit..

 

[Bobn57]

I have a 2019 GT350R and inspired this build
It's been a long process but we are getting close to finalizing this build with my 63.5 falcon Voodoo Swap ( along with massive other mods, from cantilever suspension, widening track, widening body panels, metal flares, etc.. ), wheels are temp waiting on Forgelines. We opted to scrap the OEM ECU and are now building the Haltec ECU.. going well at a slow pace.
We retained the stock headers, dampeners, etc to eliminate added vibration issues,, we do still have some around 1800-2700 rpm .. any tips? we managed to tune a lot out.

always loved Falcons, Galaxies and Torinos! Awesome build.

 

[Strokerswild]

I love it.

 

[460Fred]

Incredible!
Updates when they happen please.

 

[bryyce62]

Sweet.
Might need a tire size bump after that transplant.

 

[dirtwarrior]

I love Falcons. My first was a 61 with a 144 and 3 on the tree. I put a 200 straight 6 in it. I had a 67 Falcon wagon looked a lot like a small Fairlane. My last Falcon was a 68 and a half looked like a Torino.

 

[JCF204]

Beautiful and bad ass at the same time!

 

[kluke15]

absolutely rad

 

[Racedeck]

Sweet.
Might need a tire size bump after that transplant.

Waiting on the custom set of Forgeline wheels and we are planing up to 305's on the rear.

 

[Racedeck]

Incredible!
Updates when they happen please.

Will do... we are now in the short test drive at a low rpm stage with building up the ECU mapping once we get to where we feel comfortable, we are off the the dyno for full performance tuning. We have added a lot of safety in regards to oil ( remote oil filter, accusump, oil coolers, larger capacity pan, etc.. motor has around 7k miles on, all leak downs and inspections are within new spec. )

.. Once that is done, we have some other tweaks on suspension and chassis and then finish interior, cut and polish, some track time testing... plan on getting photos video along the way..

Sponsored