John1075
Member
- Thread starter
- #1
Gen 2 TVS head unit, ported by Bret Barber.
Bret enlarged the throttle body opening, smoothed some turns, removed the "egr bump" in the large turn, cutting it out and welding in a new, enlarged section and gave shape to the block that houses the needle bearings on the inside as well.
This head unit just recently propelled my 3800lb (w/driver) car to a 151.46 trap speed in 1500' d.a., without going crazy with ice, and also with a ported lower intake (by Bret), Gen 1 Aluminator and a 63mm upper pulley, stock lower, 6 rib! Take this off my hands and be the first to 8's with a 2.3, upper only. This had been my plan, but I decided to go ahead and start playing with the Gen 3.
$2500 plus shipping. It's packed up and ready to go.
317-362-5821 - John
Bret enlarged the throttle body opening, smoothed some turns, removed the "egr bump" in the large turn, cutting it out and welding in a new, enlarged section and gave shape to the block that houses the needle bearings on the inside as well.
This head unit just recently propelled my 3800lb (w/driver) car to a 151.46 trap speed in 1500' d.a., without going crazy with ice, and also with a ported lower intake (by Bret), Gen 1 Aluminator and a 63mm upper pulley, stock lower, 6 rib! Take this off my hands and be the first to 8's with a 2.3, upper only. This had been my plan, but I decided to go ahead and start playing with the Gen 3.
$2500 plus shipping. It's packed up and ready to go.
317-362-5821 - John
Sponsored