Velossa Tech BIG MOUTH for 2018+ Mustangs?!

[chesster51]

Come on, you know you want to. You've been couped up these past 2 months, the open road is begging you. Come on down to South Florida. I'll show you around, there's a lot to do. Bring your mask.

I wish I've been couped up, but not the case at all. Us lowly construction workers haven't missed a beat. If I weren't in crunch time on this job I would surely take you up on it though.

Sponsored

 

[MaskedRacerX]

You couldnt have been more on point with this post, we have a 2018 coming today for scanning. Design is going to start soon after, I don't forsee this taking very long as we can adapt a lot of our CAD model from the 15s into the 18s. Now that we will have the 3D scan, the process will be quick.

I will probably post up pictures of progress, maybe in this thread, maybe in a new thread. I don't know yet

Outstanding!

Been wanting my orange pair (to match Orange Fury) to get ready for summer (my previous car/set, definitely reduced IATs, knocking around town). Even got my replacement grill (basically an OEM without the logo) picked out, plan on cutting out the corner triangles (last time I did the whole center area too, that was a bit too much ...)

Some WIP photos/images would be pretty cool

 

[86pagt]

Subscribing

 

[Stam616]

Hey everyone! I know it has been a LONG time since I posted. But I have some good news. The overwhelming consensus is that we should make a BIG MOUTH ram duct for the 2018+ Mustangs, so that's what we're gonna do!

I just wanted to let you guys know that you'll be seeing this in the very near future, of course, I will probably launch it with a group buy right here on this forum so everyone can enjoy it at an initial low cost to you guys

Pictures below for those of you who are not sure what the product is or what it does. The BIG MOUTH fits between the grille and the OEM cowl port, this junction is a critical flow stream for air. A lot of unwanted turbulence, radiator backwash and pressure drop can be found here and keeping the air moving fast and remaining at high pressure is a great way to pick up some top end and lower your inlet temps! Note that the passenger side duct is for aesthetics only

Of course, we offer 28 different colors (plus glow in the dark) for those of you who dare to be bold.

Thanks!

Dan @ VT

Where can I find ones for the 15-17? Will it fit on the V6 stock intake or perhaps a CAI?

 

[dn1984]

does anybody have pictures of this on the 2018+ driver side? how well does it fit the intake snorkel?

 

[mikengail]

does anybody have pictures of this on the 2018+ driver side? how well does it fit the intake snorkel?

I don't have pictures right now, but it fits great on my 2018. When I installed it, I had it positioned so as to be barely connected to the airbox. That way, it would be totally flush with the grill when I reinstalled the front fascia.

 

[VelossaTech]

It has begun.

To get a good idea of what we were working with, I tried fitting the driver side 17 BIG MOUTH on the 18s, it fits perfect. The passenger side is what the fuss is about. Had to do a full front radiator support scan to get the data we need. We will have both sides properly taylored for the 18s.

 

[dn1984]

thanks, i will be purchasing the driver side now since i have an MMD grill on the way and may as well do it at the same time. if i order from your website they are in stock and will ship, correct?

 

[VelossaTech]

thanks, i will be purchasing the driver side now since i have an MMD grill on the way and may as well do it at the same time. if i order from your website they are in stock and will ship, correct?

Not in stock, we make them to order. Lead time is about 1 to 1.5 weeks on average. Send us pics if this goes on an 18, I'd like to showcase some 18s on our IG.

 

[dn1984]

Not in stock, we make them to order. Lead time is about 1 to 1.5 weeks on average. Send us pics if this goes on an 18, I'd like to showcase some 18s on our IG.

ok i will order it today then and will take pics of the process and final result. i may wrap it in DEI gold even though it probably won't make a difference. may look cool though.

 

[Mustang_Lou]

I'll have to one day take the bumper off my Bullitt and see if the driver side Big Mouth from my 2016 fits as good as a non-Bullitt 2018+. I suspect it will.

 

[chesster51]

I'll have to one day take the bumper off my Bullitt and see if the driver side Big Mouth from my 2016 fits as good as a non-Bullitt 2018+. I suspect it will.

How about today? lol!

 

[Mustang_Lou]

Was out on the bike so no go but I will in a week or 2.

 

[Copperhead73]

Update?

 

[VelossaTech]

Update?

Working on it

Sponsored