VelossaTech
Well-Known Member
- Joined
- Nov 6, 2015
- Threads
- 30
- Messages
- 379
- Reaction score
- 244
- Location
- Florida
- Website
- www.velossatechdesign.com
- First Name
- Dan
- Vehicle(s)
- Ford Focus ST
- Thread starter
- #1
I hope you guys are ready for this because we certainly are. After MONTHS of R&D, check this thread and countless test fits and long evenings. I am finally pleased to offer this forum a group buy for the 2018+ BIG MOUTH ram air kit. As most of you know, we specialize in smooth flow path design for many different vehicles, our background in aerospace flow path design has been put to good use for the pat 5 years here at Velossa Tech when we started this home grown business in a garage with nothing more than an idea and persistence.
Product listing is here.
Today, we are glad to launch the 2018+ mustang BIG MOUTH ram inlet that you all have been asking for! I PM'd most of you who have been following the thread with the early bird code, however if you are new and would like to get a set please reply to this thread with your participation intent.
What does a BIG MOUTH ram air do?
1. Smooths out the flow path from grille to cowl inlet, this reduces pressure drop and reduces vacuum work on the engine which increases mass flow.
2. Decreases radiator backwash at idle and low speeds (This is huge for people who live in hot states, and for supercharged cars).
3. Allows for better throttle response at highway speed since the flow is not losing momentum through the stock shroud.
4. Looks freaking amazing, duh.
I dont have a ton of sample pictures of the 18+ mustangs since it is a new release, however it will look nearly the same from the outside as the 15-17s. Here are some sample pictures of some cars.
Installation does require you to remove the bumper, however it is not difficult on the 2018+ as compared to the 15-17s.
The functional duct is the driver side only an the symmetric duct is non functional. Most people get both because as we all know, car guys are OCD
Some R&D pictures.
Some samples of 15-17 mustangs for reference.
Product listing is here.
Today, we are glad to launch the 2018+ mustang BIG MOUTH ram inlet that you all have been asking for! I PM'd most of you who have been following the thread with the early bird code, however if you are new and would like to get a set please reply to this thread with your participation intent.
What does a BIG MOUTH ram air do?
1. Smooths out the flow path from grille to cowl inlet, this reduces pressure drop and reduces vacuum work on the engine which increases mass flow.
2. Decreases radiator backwash at idle and low speeds (This is huge for people who live in hot states, and for supercharged cars).
3. Allows for better throttle response at highway speed since the flow is not losing momentum through the stock shroud.
4. Looks freaking amazing, duh.
I dont have a ton of sample pictures of the 18+ mustangs since it is a new release, however it will look nearly the same from the outside as the 15-17s. Here are some sample pictures of some cars.
Installation does require you to remove the bumper, however it is not difficult on the 2018+ as compared to the 15-17s.
The functional duct is the driver side only an the symmetric duct is non functional. Most people get both because as we all know, car guys are OCD
Some R&D pictures.
Some samples of 15-17 mustangs for reference.
Sponsored