VELOCITY BLUE S550 MUSTANG Thread

[Milktasd]

Any pics that show that red interior a little more?

Here are some quick shots

Sponsored

 

[geep81]

Had a nice weekend in Cleveland recently.

 

[Bobn57]

Spring cleaning. Stripped last years polish, clay barred, applied gyeon polish and MOHS EVO ceramic coating. Also ceramic coated trim and gtechnique window coating.

 

[wcharon]

Spring cleaning. Stripped last years polish, clay barred, applied gyeon polish and MOHS EVO ceramic coating. Also ceramic coated trim and gtechnique window coating.

Looking GREAT. What did you use for Ceramic Coating the Trim? is the first time using as i want long term advise?

Thanks in advance...

 

[Bobn57]

Looking GREAT. What did you use for Ceramic Coating the Trim? is the first time using as i want long term advise?

Thanks in advance...

thanks...I went with Gyeon Q2 trim...link below.
This is my first time using the Gyeon products but so far I'm happy with the results.
I was previously using Zaino Brothers polish since 1999. Time to change things up
Its all in the prep!
https://gyeonusa.com/collections/plastic-trim-coatings

 

[wcharon]

thanks...I went with Gyeon Q2 trim...link below.
This is my first time using the Gyeon products but so far I'm happy with the results.
I was previously using Zaino Brothers polish since 1999. Time to change things up
Its all in the prep!
https://gyeonusa.com/collections/plastic-trim-coatings

Thanks.. Appreciated. Will give it a look.

 

[Bobn57]

Looking GREAT. What did you use for Ceramic Coating the Trim? is the first time using as i want long term advise?

Thanks in advance...

here's the info I got from their rep before I started the process...

Gyeon MOHS Evo is best applied to vehicles bare surface with no other polishes, waxes, or oils applied prior. The best way to get the most out of the coating is to complete and full strip wash, followed by a chemical decontamination, followed by a clay baring of the surface, and finally onto the polishing step. Once polishing of the vehicle has been complete, it is imperative to use a panel wipe such as our Gyeon Prep; this will remove any residual polish oils and leave the surface bare and primed to receive the coating. I’ve attached a couple of videos down below that have a few tips and tricks to applying a coating. Feel free to check them out & let me know if you have any questions!

I followed this to the T and very happy with results. Same applies to the trim.
Hope this helps. We'll see how long it lasts. I used one coat for paint and trim. It's supposed to last up to 3 years with proper maintenance. I also bought Gyeon Quartz Ceramic Detailer for maintaining the coating. I originally ordered these through the Gyeon USA web site. Shipping was expensive. Amazon also has these and with Prime membership shipping is free. Same cost as Gyeon's web site for products.

 

[wcharon]

here's the info I got from their rep before I started the process...

Gyeon MOHS Evo is best applied to vehicles bare surface with no other polishes, waxes, or oils applied prior. The best way to get the most out of the coating is to complete and full strip wash, followed by a chemical decontamination, followed by a clay baring of the surface, and finally onto the polishing step. Once polishing of the vehicle has been complete, it is imperative to use a panel wipe such as our Gyeon Prep; this will remove any residual polish oils and leave the surface bare and primed to receive the coating. I’ve attached a couple of videos down below that have a few tips and tricks to applying a coating. Feel free to check them out & let me know if you have any questions!

I followed this to the T and very happy with results. Same applies to the trim.
Hope this helps. We'll see how long it lasts. I used one coat for paint and trim. It's supposed to last up to 3 years with proper maintenance. I also bought Gyeon Quartz Ceramic Detailer for maintaining the coating. I originally ordered these through the Gyeon USA web site. Shipping was expensive. Amazon also has these and with Prime membership shipping is free. Same cost as Gyeon's web site for products.

Thanks for the Tips.... I will let you know once i decide. Have been using Chemical Guys Gel and has been working great especially on the Ford Explorer Limited that i have also that has a lot of trim.

 

[PLAYTYM]

Observation run with the mustang owners club here in South Australia.

and one with the black Aussie shadow edition wheels

 

[jblue]

Observation run with the mustang owners club here in South Australia.

and one with the black Aussie shadow edition wheels

Nice looking blue. Looks great. Kinda funny, you guys still have Kmart there! I believe they are all gone in the US.

 

[PLAYTYM]

Yep and still cheap stuff from China in it as well lol

 

[CoyoteAntz]

View attachment 672855 View attachment 672855

 

[CoyoteAntz]

 

[geep81]

Recently lowered with Ford Performance springs.

 

[Deleted member 56911]

Sponsored