Sponsored

Sway Bar Upgrade worth it for 2021 PP?

NightmareMoon

Well-Known Member
Joined
Nov 22, 2015
Threads
42
Messages
5,683
Reaction score
4,698
Location
Austin
Vehicle(s)
2016 Mustang GT PP
Vehicle Showcase
1
The pp1 should have been the base suspension and track kit the Pp1
I can’t imagine how floaty the base suspension must be
Local good driver autocrossed his base model (3.55 gears?). Just immediately goes from one bumpstop to the other. Not enough spring or shock for such a heavy car.
Sponsored

 

Dana Pants

Well-Known Member
Joined
Oct 11, 2018
Threads
11
Messages
959
Reaction score
960
Location
Burlington MA
First Name
Dana
Vehicle(s)
2018 GT PP1
Local good driver autocrossed his base model (3.55 gears?). Just immediately goes from one bumpstop to the other. Not enough spring or shock for such a heavy car.
You should see what the base V6 does…
 
OP
OP
pappagray

pappagray

Well-Known Member
Joined
May 29, 2021
Threads
11
Messages
174
Reaction score
285
Location
Canada
First Name
Brandon
Vehicle(s)
2021 PP1
Update. Installed the extended length ball joints and bump steer kit at the same time. Much better improvement. Of course the car is still not dead flat, but I was happy with the improvement. Saw a consistent reducing in my lap times and was very happy with that.

I think my next move will be Struts and a front bar over the winter(going to finish the season with this setup). Also a set of track dedicated wheels and sub 200 treadwear tires, and a diff cooler to go with it.

AS far as a street/track day car is there a strut that everyone really likes? FRPP track strut?

Would like to hear some experienced suggestions
 

strengthrehab

Well-Known Member
Joined
Feb 13, 2015
Threads
74
Messages
1,181
Reaction score
441
Location
Houston
First Name
Ken
Vehicle(s)
2016 DIB Base GT with PP
The track kit is very good for most until they want to upgrade to higher spring rates.
 

Sponsored

Norm Peterson

corner barstool sitter
Joined
Jul 22, 2013
Threads
11
Messages
9,011
Reaction score
4,721
Location
On a corner barstool not too far from I-95
First Name
Norm
Vehicle(s)
'08 GT #85, '19 WRX
Update. Installed the extended length ball joints and bump steer kit at the same time. Much better improvement. Of course the car is still not dead flat,
I don't think you really want "dead flat". The sensations associated with roll are part of your feedback.


Norm
 
OP
OP
pappagray

pappagray

Well-Known Member
Joined
May 29, 2021
Threads
11
Messages
174
Reaction score
285
Location
Canada
First Name
Brandon
Vehicle(s)
2021 PP1
Sorry I should have rephrased that, I'm not expecting dead flat. Just using that as a benchmark of comparison
Sponsored

 
 




Top