Step up from the 350R Wing with a direct replacement like the Verus UCW Wing

[NoXiDe]

Since my ownership of the car, I've had Anderson Composites GR Wing then it got replaced with the OE-R Wing and here we are today.

350R Wing measured 60 inches
Verus UCW Wing without end plates measured 63 inches

Completely do-able, this car technically has had 3 different wings without requiring a new trunk.

Install was very straight forward, just snug no need to overtighten, follow that rule and you won't have any issues. I think it took me approximately 2 hours from unboxing to cleanup.

Sponsored

 

[Biggsy]

Well done man. Great decision!

Pictures of final install?

 

[NoXiDe]

Well done man. Great decision!

Pictures of final install?

Not on track but, this will do.

 

[JeremyPro5.0]

What car is that on?

 

[Biggsy]

Not on track but, this will do.

Sorry to ask for too much but do you have a side view?

 

[NoXiDe]

Sorry to ask for too much but do you have a side view?

 

[NoXiDe]

What car is that on?

This is a GT350

 

[Biggsy]

Looks great sir.

 

[NoXiDe]

Looks great sir.

I released this write up way sooner than I liked. Really wanted to get some on track pics before releasing it but, I knew you really needed it. I'm really impressed with how everything went and you do not technically need a second hand.

Please make sure you watch the video because it had some really helpful hints.

 

[JeremyPro5.0]

This is a GT350

Not with that rear badging it aint??????

 

[NoXiDe]

Not with that rear badging it aint??????

Let's just agree it's a Shelby then. What kind, whatever floats your boat. Pst, you're actually driving a Ford Performance product.

 

[Biggsy]

I released this write up way sooner than I liked. Really wanted to get some on track pics before releasing it but, I knew you really needed it. I'm really impressed with how everything went and you do not technically need a second hand.

Please make sure you watch the video because it had some really helpful hints.

Haha I appreciate it. I wouldn’t think it would be difficult. Did the hard part of having the holes already done. I wonder if larger end plates would be beneficial

 

[JeremyPro5.0]

You can agree to anything that makes you happy.

Just saying it aint no 350 with that badging, unless you changed out the entire rear panel.

 

[NoXiDe]

You can agree to anything that makes you happy.

Just saying it aint no 350 with that badging, unless you changed out the entire rear panel.

All good, pretty soon it will be a CPC anyhow.

Haha I appreciate it. I wouldn’t think it would be difficult. Did the hard part of having the holes already done. I wonder if larger end plates would be beneficial

After thinking this through, you may need to have a custom endplate created. You'll likely have a hard time finding one with the right distance on both ends.

 

[slowdown]

I have an Anderson Wing. Do those holes match? They had to be drilled into my trunk but Anderson says the wing isn't a direct OEM replacement for the GT350R wing. Also I don't have the support bars so I'll have to fabricate something I suppose.

I am in the market for an adjustable wing as I'm having high speed tramline problems and cannot adjust my rear downforce.

Sponsored