Steel Wheels for Mustangs

[Must_Tang]

Hi,

I've been unable to find steel wheels for our Mustangs. I'm looking for cheap trackday steelies. Do these exist? 18X10's preferable.

Sponsored

 

[Angry50]

want some cheap track day wheels? or specifically want steel wheels for a reason?

 

[Must_Tang]

I'd like inexpensive wheels that are cheap to buy so I won't have a freak out if they get damaged. Steelies are good for this because you can straighten them if slightly bent. And steel is pretty strong. As far as weight, you'll always have the folks that will balk at all this unsprung weight. meh. Those are usually the folks that don't track their cars.

While the manufacturers represented here do indeed make some awesome wheel designs and are great QUALITY pieces, I wouldn't dare take these showpiece wheels on the track. Stuff gets ruined out there, covered with brake dust, etc.

Maybe it's just not worth it from a profit standpoint for companies to make these.

.02!

 

[VinnAY]

Most of us have the same problem looking for steelies for our winter wheel/tire combo's, atleast in 18s, not sure about 18x10 though.

 

[Angry50]

just grab some cheap AM wheels or LMR sve wheels. $150 each. or grab some used wheels cheap wheels, see old bullits for 600 with tires and such all the time

 

[The Great Gazoo]

18X7.5" steelies here - says fits 2014 Mustang V8, but should be the same for 2015+ since other rims exchange for 5G cars.

http://rssw.com/macpek/entries/view/num_produit:X42858/year:2014/make:Ford/model:Mustang%20V8%20except%20Brembo/diameter:18/selected_diameter:18/lang:eng

Does NOT fit Brembos. These are good for winter tires, but if you want 10" then you could get them cut/welded by a good wheel/machine shop.

 

[Xavier]

18X7.5" steelies here - says fits 2014 Mustang V8, but should be the same for 2015+ since other rims exchange for 5G cars.

http://rssw.com/macpek/entries/view...mbo/diameter:18/selected_diameter:18/lang:eng

Does NOT fit Brembos. These are good for winter tires, but if you want 10" then you could get them cut/welded by a good wheel/machine shop.

I wonder how much these weigh. They could be useful as front runners.

Sponsored