jasonstang
Well-Known Member
I finally installed mine yesterday. Pretty easy. Mine did have sealer from factory I just scrapped it off with a putty knife.
On a second note, the provided bolts are not long enough. I threaded one in without the jack rail. The threads on the welded nut were not 100% all the way so I went and bought longer bolts.I actually only bought two extra M10-1.5 bolts because I reused the factory ones and left the very far back one in as they are holding some kind of bracket otherwise you would only have one of them held down with the jack rails installed.
I torqued them to BMR recommend 41ft lbs with blue loctite.
On a second note, the provided bolts are not long enough. I threaded one in without the jack rail. The threads on the welded nut were not 100% all the way so I went and bought longer bolts.I actually only bought two extra M10-1.5 bolts because I reused the factory ones and left the very far back one in as they are holding some kind of bracket otherwise you would only have one of them held down with the jack rails installed.
I torqued them to BMR recommend 41ft lbs with blue loctite.
Sponsored
