- Thread starter
- #1
Pretty excited for this.
The first mod almost anyone does is a catback, and then later regret not getting headers and catback together for a performance connection. And even then, most systems that aren't of the same make in header and exhaust don't play nice with each other and your adding pieces, welding, etc. to get rid of the factory connection point.
Most catbacks are 3", and then have some sort of neckdown to the 2.25" factory connection point. Corsa uses and extension piece, which results in an extra clamp in the system. MBRP just slides the size down on a single portion of pipe. All the system are slightly different.
We have been playing with different configurations that should work with just about any exhaust system out there.
The system will have a flare to cover all of the 3" systems, 0-2" of trim down may be needed on the header lead pipes, and you will be able to cut off the neckdown of your aftermarket systems for a single point of 3" connection.
Corsas you will simply cut off the flared section of the lead pipes to leave the 3" section of pipe that will slide right into the corsa system. The corsa insert at the perf connection side is 3". The corsa pipe itself is already flared out to go over 3" and will have a single 3" connection point.
So, no more worrying about purchasing a factory connect system, with plans to do headers later and having to weld, cut, and clamp multiple sections of piping which always leads to a looser, more rattling exhaust.
These systems will be available in the Stainless Works or Stainless power in catted and offroad configurations.
The best thing about this is it's a TEAM BEEFCAKE RACING EXCLUSIVE!!!
Thats right! These systems are an exclusive we have been working on some time to offer to the guys and gals! The systems will only be $75 more than the current header systems at retail. We have 75 sets on order, so we should be able to fulfill lots of orders rather quickly.
Get in line for yours and hit us up for forum specials!
Beef
513-478-1965
stainless power offroad
http://teambeefcakeracing.com/sm15h3orlg.html
stainless power catted
http://teambeefcakeracing.com/sm15h3catlg.html
stainless works offroad
http://teambeefcakeracing.com/m15h3orlg.html
stainless works catted
http://teambeefcakeracing.com/m15h3catlg.html
The first mod almost anyone does is a catback, and then later regret not getting headers and catback together for a performance connection. And even then, most systems that aren't of the same make in header and exhaust don't play nice with each other and your adding pieces, welding, etc. to get rid of the factory connection point.
Most catbacks are 3", and then have some sort of neckdown to the 2.25" factory connection point. Corsa uses and extension piece, which results in an extra clamp in the system. MBRP just slides the size down on a single portion of pipe. All the system are slightly different.
We have been playing with different configurations that should work with just about any exhaust system out there.
The system will have a flare to cover all of the 3" systems, 0-2" of trim down may be needed on the header lead pipes, and you will be able to cut off the neckdown of your aftermarket systems for a single point of 3" connection.
Corsas you will simply cut off the flared section of the lead pipes to leave the 3" section of pipe that will slide right into the corsa system. The corsa insert at the perf connection side is 3". The corsa pipe itself is already flared out to go over 3" and will have a single 3" connection point.
So, no more worrying about purchasing a factory connect system, with plans to do headers later and having to weld, cut, and clamp multiple sections of piping which always leads to a looser, more rattling exhaust.
These systems will be available in the Stainless Works or Stainless power in catted and offroad configurations.
The best thing about this is it's a TEAM BEEFCAKE RACING EXCLUSIVE!!!
Thats right! These systems are an exclusive we have been working on some time to offer to the guys and gals! The systems will only be $75 more than the current header systems at retail. We have 75 sets on order, so we should be able to fulfill lots of orders rather quickly.
Get in line for yours and hit us up for forum specials!
Beef
513-478-1965
stainless power offroad
http://teambeefcakeracing.com/sm15h3orlg.html
stainless power catted
http://teambeefcakeracing.com/sm15h3catlg.html
stainless works offroad
http://teambeefcakeracing.com/m15h3orlg.html
stainless works catted
http://teambeefcakeracing.com/m15h3catlg.html
Sponsored