Stage 8 locking header bolts

[MikeG]

Having Kooks LT's installed soon...anyone used these? Which size/part number is correct? There are a couple options.

Thanks

Sponsored

 

[gsxr1300]

They should come with the headers. Mine did.

 

[zaquhree]

Mine came with it and my Kooks

 

[kcc0521]

I am thinking about trying these too but I am not sure you will be able to get the locking clips on since the bolts are so hard to get to.

 

[ifly680g]

I used them with my Headers but only was able to put them on a few bolts as most were too hard to reach to get the locking clips secured.

P.S. Kooks includes two sizes, one for the headers and one size for the collector bolts.

 

[jgedde]

I've used those for years. Good stuff. Really do work. In some cases you may have to grind the clips a bit to fit them to the tubes if they run a bit close.

John

 

[Slamdcoop0428]

Don't need them. Never have had one come loose on a coyote.

 

[MikeG]

I used them with my Headers but only was able to put them on a few bolts as most were too hard to reach to get the locking clips secured.

P.S. Kooks includes two sizes, one for the headers and one size for the collector bolts.

Separate question but my setup will be similar to yours....what numbers did your car put down after those mods?

Sponsored