California ( sold ) Fs: stage2 procharger, procharger crank support

[TGGT]

Selling my stage 2 d1x procharger kit. Comes with the red race valve, a 4.25 pulley with new belt and 4.5 pulley with a used belt also a set of id 1050x injectors. Asking 5,500 plus shipping. The crank support has about 1000 miles on it and will come with an extra bearing and a gen3 stage2 pulley asking 600 plus shipping. Ithe crank support is missing 1 bolt and one small bracket that can be purchased from procharger. All parts are of of my 19 gt

Sponsored

 

[Revtastic]

Did you ever dyno if so what kinda numbers did you get

 

[TGGT]

Did you ever dyno if so what kinda numbers did you get

820 wheel on the 4.5 pulley never dynod on the 4.25

 

[Revtastic]

820 wheel on the 4.5 pulley never dynod on the 4.25

Wow that's impressive auto or manual?

 

[TGGT]

Wow that's impressive auto or manual?

Auto. I’m guessing somewhere around 850-860 on the 4.25

 

[Revtastic]

Auto. I’m guessing somewhere around 850-860 on the 4.25

Wow this is the exact set up I am looking for did you do any transmission work ..

 

[TGGT]

Wow this is the exact set up I am looking for did you do any transmission work ..

Stock a10 with 10’000 miles on this setup. The key to making it last was keeping it off of the drag strip for one. And also the trans tuning. I had it pulling a considerable amount of timing on the shifts

 

[Revtastic]

Stock a10 with 10’000 miles on this setup. The key to making it last was keeping it off of the drag strip for one. And also the trans tuning. I had it pulling a considerable amount of timing on the shifts

Who tuned it ...or did you buy a tune ?

 

[TGGT]

Who tuned it ...or did you buy a tune ?

I tuned it

 

[Revtastic]

Stock a10 with 10’000 miles on this setup. The key to making it last was keeping it off of the drag strip for one. And also the trans tuning. I had it pulling a considerable amount of timing on the shifts

One more question did you do the oil pump gears ?

 

[TGGT]

One more question did you do the oil pump gears ?

Yes I did. I also have a brand new set of boundry gears for sale

 

[Revtastic]

Yes I did. I also have a brand new set of boundry gears for sale

I forgot to ask what type fuel were you running?

 

[TGGT]

I forgot to ask what type fuel were you running?

E85

 

[TGGT]

I discovered today that I’m missing 1 bolt and 1 small bracket for the crank support. I’m sure they can be easily attained from procharger, but as a result I’ll be lowering the price on the crank support and pulley to $600

 

[turnswrench]

I discovered today that I’m missing 1 bolt and 1 small bracket for the crank support. I’m sure they can be easily attained from procharger, but as a result I’ll be lowering the price on the crank support and pulley to $600

You are a solid dude. Good luck with sale.

Sponsored