SHxTGUN
Well-Known Member
- Joined
- Jun 29, 2020
- Threads
- 16
- Messages
- 128
- Reaction score
- 32
- Location
- WPB, Florida
- Vehicle(s)
- 2020 Mustang GT PP2
- Thread starter
- #1
I replaced my battery a week ago (XS D4700) and while it sits in the battery box just fine, when I try and put the battery cover back on, it doesn't sit flush and creates a bulge when I try and close the hood. Only on the left side where the battery sits of course. When I take the battery cover off and close the hood, it comes down just fine and there is no gap/bulge. I've tried for a while trying to position the cover as best as I can, but it will just not sit right.
My question is, is it okay to just not run the battery cover at all? Or is it 100% needed. I was running without it for a few days but today I decided to try to put the cover on again and I was not able to get it to sit without the gap in the hood. I'll include some pictures of how bad that gap is.
My question is, is it okay to just not run the battery cover at all? Or is it 100% needed. I was running without it for a few days but today I decided to try to put the cover on again and I was not able to get it to sit without the gap in the hood. I'll include some pictures of how bad that gap is.
Sponsored