marzman
Well-Known Member
- Joined
- Mar 11, 2018
- Threads
- 21
- Messages
- 172
- Reaction score
- 131
- Location
- Cheshire/Staffordshire
- First Name
- Chris
- Vehicle(s)
- MY17 Grabber Blue GT
- Thread starter
- #1
Eibach Pro Lowering Springs - 30mm/25mm drop. Approx 7k miles usage.
£100 + £15 P&P
Maxton Designs Front Splitter (ABS) Approx. 1500 miles usage.
£100 collection only due to size.
This is in really good condition, apart from 2 tiny pilot holes just above the badge which i drilled for my number plate bracket which was mounted underneath the splitter. Barely noticeable when on the car.
You'll need to buy about 20x M6 bolts (30mm), washers, and nylock nuts in order to fit this - which'll cost about £6.
Louvres - Rear Quarter Windows - £10 + £2 P&P
These are back ABS plastic and again, stick on with VHB tape which you'll need to buy.
Everything else below has now been sold
Custom Muffler delete straight pipes (axle back) - approx 10k miles usage
£90 + £10 P&P
I was inspired by the Mishimoto Race Axle Backs which are basically just a straight pipe/muffler delete, so I had these made and fitted by Powerflow. They are mild steel pipe and stainless tips, which look OEM.
These are not bolt on - it will require minor fabrication/welding from an exhaust shop in order to fit. For reference my local garage removed these and refitted my stock back boxes for £90 earlier this week - so budget a similar figure to fit these.
Quick Video Here
MMD V-Series Side Scoops + inserts
£250 + £6 P&P
I could be wrong but I don't believe you can get these in the UK - I ordered these from American Muscle for delivery to me when on holiday in Canada! The inserts were never fitted and are therefore brand new.
The scoops are painted in grabber blue and the paint is in excellent condition with the exception of the stone chips on the leading edge.
They stick on with 3M VHB tape which you can buy on eBay for under a fiver.
MP Concepts GT350 Style Fender Scoops
£80 + £6 P&P
These look great along with the side scoops! Also need VHB tape to fit.
Coin Tray - carbon hydro-dipped
£10 + £2 P&P
I only had this in my car for about 200 or so miles. Nice little item, and fits perfectly (better than the OEM rubber piece!)
And finally here are a couple of pics of my car with all these mods on, so you can get an idea of how they'll look.
£100 + £15 P&P
Maxton Designs Front Splitter (ABS) Approx. 1500 miles usage.
£100 collection only due to size.
This is in really good condition, apart from 2 tiny pilot holes just above the badge which i drilled for my number plate bracket which was mounted underneath the splitter. Barely noticeable when on the car.
You'll need to buy about 20x M6 bolts (30mm), washers, and nylock nuts in order to fit this - which'll cost about £6.
Louvres - Rear Quarter Windows - £10 + £2 P&P
These are back ABS plastic and again, stick on with VHB tape which you'll need to buy.
Everything else below has now been sold
Custom Muffler delete straight pipes (axle back) - approx 10k miles usage
£90 + £10 P&P
I was inspired by the Mishimoto Race Axle Backs which are basically just a straight pipe/muffler delete, so I had these made and fitted by Powerflow. They are mild steel pipe and stainless tips, which look OEM.
These are not bolt on - it will require minor fabrication/welding from an exhaust shop in order to fit. For reference my local garage removed these and refitted my stock back boxes for £90 earlier this week - so budget a similar figure to fit these.
Quick Video Here
MMD V-Series Side Scoops + inserts
£250 + £6 P&P
I could be wrong but I don't believe you can get these in the UK - I ordered these from American Muscle for delivery to me when on holiday in Canada! The inserts were never fitted and are therefore brand new.
The scoops are painted in grabber blue and the paint is in excellent condition with the exception of the stone chips on the leading edge.
They stick on with 3M VHB tape which you can buy on eBay for under a fiver.
MP Concepts GT350 Style Fender Scoops
£80 + £6 P&P
These look great along with the side scoops! Also need VHB tape to fit.
Coin Tray - carbon hydro-dipped
£10 + £2 P&P
I only had this in my car for about 200 or so miles. Nice little item, and fits perfectly (better than the OEM rubber piece!)
And finally here are a couple of pics of my car with all these mods on, so you can get an idea of how they'll look.
Sponsored
Last edited:
