Shelby Coolant Reservoir Tank

[NC252]

I was dead set on ordering an aluminum one but looks like they have been discontinued. HERE I thought it might look nice with the other parts they offer in aluminum.

Has anyone installed a black one and can share some photos?

Thanks

Sponsored

 

[fishpick]

That sucks - I liked that tank!

 

[Epiphany]

I've been happy with anything from Canton. I don't use this one but if I wanted one I'd get this and make it work before I bought anything from "Shelby."

https://www.cantonracingproducts.co...n-tank-2015-up-mustang-with-stock-neck-black/

 

[Jmeo]

I was dead set on ordering an aluminum one but looks like they have been discontinued. HERE I thought it might look nice with the other parts they offer in aluminum.

Has anyone installed a black one and can share some photos?

Thanks

Really, too bad as I just one hour ago sold the one I had listed in the classified section.

 

[Strokerswild]

Canton makes good poop. They're my #1 choice for oil pans.

 

[Jmeo]

I've been happy with anything from Canton. I don't use this one but if I wanted one I'd get this and make it work before I bought anything from "Shelby."

https://www.cantonracingproducts.co...n-tank-2015-up-mustang-with-stock-neck-black/

C&R Makes Shelby's tanks, they are a great company.

 

[NC252]

I've been happy with anything from Canton. I don't use this one but if I wanted one I'd get this and make it work before I bought anything from "Shelby."

https://www.cantonracingproducts.co...n-tank-2015-up-mustang-with-stock-neck-black/

Thanks for that link. Looks like they also have one in the same aluminum color. I will definitely keep an eye open for an in stock status.

 

[Epiphany]

Their poop is good. When building up a small block for my '90 coupe, I wanted a thermostat housing that had a straight shot and that used an AN male bung (sorry for those of you that just got titillated). Sure enough, Canton made one. Beautiful piece too.

C&R Makes Shelby's tanks, they are a great company.

I've run C&R's hardware on Mustangs before and been very happy. The reason why I put Shelby in quotes is because that's my beef - the tank isn't theirs. I'd get C&R's own version. I'd be more impressed if Shelby did their own. Then again, I did buy a differential expansion tank that they did for my '09 GT500 and it was the worst quality fabwork I had ever seen - until I saw another one a friend bought. It was even worse.

 

[NC252]

Really, too bad as I just one hour ago sold the one I had listed in the classified section.

Your build thread is where I saw it first. I went looking to see if it was listed but completely over looked it.

C&R Makes Shelby's tanks, they are a great company.

Thanks I will take a look.

 

[Epiphany]

If you have to have the C&R version I'd get on the horn and look for somebody that may still have one if C&R can't dig one up that they may have on hand.

From a fabrication standpoint, the Moroso tank has some of the nicest tig welds I've seen on these.

 

[protraxduner]

black shelby tank

 

[Jmeo]

If you have to have the C&R version I'd get on the horn and look for somebody that may still have one if C&R can't dig one up that they may have on hand.

From a fabrication standpoint, the Moroso tank has some of the nicest tig welds I've seen on these.

Moroso makes the fuse box cover & brake reservoir cover for Shelby. I agree, the bead on these rivals the best of them

 

[WildHorse]

https://www.cantonracingproducts.co...n-tank-2015-up-mustang-with-stock-neck-black/

Would be better if they made an adjustable tang ( where it slips into the shroud ) for some aftermarket air intakes, considering the 415 price tag. Just a thought.

 

[Epiphany]

Would be better if they made an adjustable tang ( where it slips into the shroud ) for some aftermarket air intakes, considering the 415 price tag. Just a thought.

https://www.summitracing.com/parts/ctr-80-247sblk

Tangs can't be slotted?

 

[NC252]

black shelby tank

Love that red cross brace. Did you have a paint shop do that?

Sponsored