BenAcero
New Member
- Joined
- Nov 11, 2019
- Threads
- 1
- Messages
- 1
- Reaction score
- 0
- Location
- New Jersey
- First Name
- Ben
- Vehicle(s)
- 2015 GT PO
- Thread starter
- #1
I have the following items for sale from my '15 GT PP. Reason I am selling is because I went twin turbos.
Driver Side and Passenger Side JLT Oil Catch Can - installed @ 0 miles and taken off at ~40k. $80 each / $ 150 both
1-7/8" Stainless Power Long Tube Headers with mid pipes - installed ~4000 miles and taken off at ~40k. $400
MBRP Street 3" exhaust with 4.5" tips - Installed ~4000 miles and taken off ~40k. $100
This exhaust looks worse than it is. The welds are still in great shape and really only need to get cleaned up with a wire wheel. You will most likely need to get a hardware kit for this directly from MBRP. The hardware was rusty and did not even bother saving it, it was swept up after new exhaust install.
I also have (1) new connecting clamp between the mid pipe and H pipe. I will let this go for $50 bucks.
GT350 Cold Air Intake - installed ~4000 miles and taken off ~40k. $100. I can throw in the old filter but I would recommend getting a new one from JLT.
Stock S550 plastic valve covers. No issue at all with them I just went with the aluminum ones because I did not want them to melt with the new TT setup. $75 for both
Driver Side and Passenger Side JLT Oil Catch Can - installed @ 0 miles and taken off at ~40k. $80 each / $ 150 both
1-7/8" Stainless Power Long Tube Headers with mid pipes - installed ~4000 miles and taken off at ~40k. $400
MBRP Street 3" exhaust with 4.5" tips - Installed ~4000 miles and taken off ~40k. $100
This exhaust looks worse than it is. The welds are still in great shape and really only need to get cleaned up with a wire wheel. You will most likely need to get a hardware kit for this directly from MBRP. The hardware was rusty and did not even bother saving it, it was swept up after new exhaust install.
I also have (1) new connecting clamp between the mid pipe and H pipe. I will let this go for $50 bucks.
GT350 Cold Air Intake - installed ~4000 miles and taken off ~40k. $100. I can throw in the old filter but I would recommend getting a new one from JLT.
Stock S550 plastic valve covers. No issue at all with them I just went with the aluminum ones because I did not want them to melt with the new TT setup. $75 for both
Sponsored