Running list 18, 19 & 20 inch 9.5+ width wheels for front PP (+weights, approx price)

[valentinoamoro]

I'm looking for a near future upgrade from these good looking boat anchor PP wheels. I value handling, both on auto-x and DD'ing. It seems a lot of handling oriented folks recommend wider fronts and square setup (not sure why other than rotation).

However, I'm having the devils time finding out what options there are that work (read a bunch of threads), so starting a thread here to serve as a quick reference. All weights below are wheels only. All wheels below must be <26 pounds as performance in the main point of this thread. Prices also should be included. Only fitments of 9.5 inch front and above should be included.

20 inch diameter (I get 20 inch isnt exactly a perf wheel...)
20x10 inch width - Volks TE37 on 285 tires (kkakonn is running). Weight 24 pounds. Price around $1000+

10". TSW Bathurst. Confirmed fitment by Need4Speed motors and GetYourWheels. I dont have the weight in this spec. Price around $400-450

10": Rohana RF1. Confirmed fitment on N4S site. I dont have the weight in this spec. Price around $400-450.

10":: MRR FS01. Confirmed fitment on N4S site.About 24.5 pounds. Price around $400-450.

10" 9.5" - Forgestar CF10. Confirmed fitment on N4S site. I dont have the weight in this spec. Price around $450-500.

10" & 9.5" - Forgestar F14. Confirmed fitment on N4S site. I dont have the weight in this spec. Price around $450-500.

19 inch diameter
Widest wheel in 19 inch: 19x10.5 (Toothless is running) on 285 tires. Custom center cap needed. Wt 24 pounds. Rays Grams Light 57 Xtreme. Price around $550-600. Apparently a 295 front may also fit but not tested.

10". MRR 350. Custom designed for the Stang. Weight around 24 pounds. Price around $350-400.

10". MRR FS01. Custom offsets. Weight around 23.4 pounds. Price around $350-400.

9.5". Advanti Hybris. Confirmed fitment by Riz (but spacer needed for centercap). Weight around 21 pounds. Price around $250-300.

9.5". TSW Bathurst. Confirmed fitment by Need4Speed motors and GetYourWheels. Weight around 22 pounds. Price around $350-450.

9.5" - Forgestar CF10. Confirmed fitment on N4S site. I dont have the weight in this spec. Price around $390-450.

10" - Forgestar F14. Confirmed fitment on N4S site. I dont have the weight in this spec. Price around $450-500.

18 inch diameter

10" Apex EC-7 ,22lbs, $330


:cheers:

Sponsored

 

[z06psi]

19x9.5 on 275 tires. Advanti Hybris. Confirmed fitment by Riz (but spacer needed for centercap). Weight around 21 pounds. Price around $250-300.

But the 8.5 fits just fine.

 

[valentinoamoro]

But the 8.5 fits just fine.

Sure, but see my OP. I mention a lot of us want wider fronts as the car is heavy and more tire (on a properly sized wheel) in the front will reduce push and increase limits.

 

[gtorpedo]

Here's an option for a 18X10 squared setup that I have my eye on.

- Apex EC-7
- 22lbs
- 18 x10
- $330

It appears they are looking for test fitments and will have these available at some point for the S550.

http://www.apexraceparts.com/apex-products/Mustang/18x10-ET43-APEX-EC-7-Mustang-Wheel.html#.VgLgDJebHXE

 

[Nine]

According to Need4Speed the 19x9.5 Bathurst is 21.4 pounds.
http://www.mustang6g.com/forums/showpost.php?p=484543&postcount=8


Also, I have no idea if it fits the PP car (or non-PP cars for that matter) and I can't really find any info regarding it and the S550, but...

Enkei makes a RPF1 wheel with the correct bolt pattern, a 42mm offset, and offers it in 19x9.5" Weights seem to be listed around 20 pounds, and price is in the $4xx range. If anyone knows for sure if this fits or not I'd love to hear.

 

[valentinoamoro]

According to Need4Speed the 19x9.5 Bathurst is 21.4 pounds.
http://www.mustang6g.com/forums/showpost.php?p=484543&postcount=8


Also, I have no idea if it fits the PP car (or non-PP cars for that matter) and I can't really find any info regarding it and the S550, but...

Enkei makes a RPF1 wheel with the correct bolt pattern, a 42mm offset, and offers it in 19x9.5" Weights seem to be listed around 20 pounds, and price is in the $4xx range. If anyone knows for sure if this fits or not I'd love to hear.

It should fit. Go to the N4S site and select GT-PP, then select those wheels for the fronts. It seems if they dont fit they dont list them.

 

[Need4SpeedMotors]

Allow me to provide some insight if I may guys

20" wheels light weight

MRR FS01 20x10 & 20x11 I have a set being cut ill have weights shortly for you guys

20x10 TE37 wheels confirmed at 24 lbs per rim

20x10 TSW Bathurst wheels do work, need a 5 mm spacer upfront just a heads up, even a 20x11 works on the rear as well.

20x10 24.2 lbs
20x11 23.5 lbs

Rohana RF2 wheels have been done in house

20x10 24.3 lbs
20x11 23.45 lbs

Forgestar CF10 wheels have been done

20x9 25.95 lbs
20x10.5 26.9 lbs

Forgestar F14s have been done as well

20x9.5 26.4 lbs per rim
20x11 27.5 lbs per rim

HRE FF15 wheels confirmed

20x10 24.2 lbs
20x11 24.8 lbs

Stance SC-1 wheels confirmed

20x9 29.7 lbs
20x10.5 30.2 lbs

Savini BM10 wheels

20x10 32.95 lbs

Stance SF01 rotory forged wheels

20x9 24.65 lbs
20x10.5 24.62 lbs

Avant Garde M590 ( first person to do a square fitment confirmed with special offsets for GT and GT PP)

20x10 30.55 lbs


19" wheels

TSW Bathurst for the mustang confirmed fitment is 19x9 & 19x9.5

19x9 20.05 lbs
19x9.5 21.4 lbs

MRR FS01 custom cut on order

19x10 23.45 lbs
19x11 22.05 lbs

MRR GF9 confirmed fitment for GT and GT PP

19x9.5 23.75 lbs

MRR M350 (mustang specific wheel)

19x10 ~ 23.5 if not less
19x11 ~ 24.9

MRR VP5 confirmed fitment for GT and GT PP

19x9.5 29.35 lbs

Forgestar CF5V confirmed with in house weighing confirmed fitment for GT and GT PP

19x10 23.3 lbs
19x11 22.6 lbs

18" wheels

TE37

18x9.5 18.4 lbs

18x10 ( confirmed to fit GT PP)

FF15

18x10
18x10.5

Forgstar CF5 ( confirmed fitment for GT and GT PP)

18x10 ~ 24.9 lbs

here is the link to our official wheel weight thread.

http://www.mustang6g.com/forums/showthread.php?t=18164

 

[Nine]

It should fit. Go to the N4S site and select GT-PP, then select those wheels for the fronts. It seems if they dont fit they dont list them.

Unfortunately it doesn't look like they list those wheels at all.

 

[Need4SpeedMotors]

Unfortunately it doesn't look like they list those wheels at all.

We havent put those up yet on our site

 

[Nine]

We havent put those up yet on our site

So does that mean the 19x19.5 RPF1 works and fits on the PP cars? If you say yes it'll make my day.

 

[valentinoamoro]

Allow me to provide some insight if I may guys

20" wheels light weight

MRR FS01 20x10 & 20x11 I have a set being cut ill have weights shortly for you guys

20x10 TE37 wheels confirmed at 24 lbs per rim

20x10 TSW Bathurst wheels do work, need a 5 mm spacer upfront just a heads up, even a 20x11 works on the rear as well.

20x10 24.2 lbs
20x11 23.5 lbs

Rohana RF2 wheels have been done in house

20x10 24.3 lbs
20x11 23.45 lbs

Forgestar CF10 wheels have been done

20x9 25.95 lbs
20x10.5 26.9 lbs

Forgestar F14s have been done as well

20x9.5 26.4 lbs per rim
20x11 27.5 lbs per rim

HRE FF15 wheels confirmed

20x10 24.2 lbs
20x11 24.8 lbs

Stance SC-1 wheels confirmed

20x9 29.7 lbs
20x10.5 30.2 lbs

Savini BM10 wheels

20x10 32.95 lbs

Stance SF01 rotory forged wheels

20x9 24.65 lbs
20x10.5 24.62 lbs

Avant Garde M590 ( first person to do a square fitment confirmed with special offsets for GT and GT PP)

20x10 30.55 lbs


19" wheels

TSW Bathurst for the mustang confirmed fitment is 19x9 & 19x9.5

19x9 20.05 lbs
19x9.5 21.4 lbs

MRR FS01 custom cut on order

19x10 23.45 lbs
19x11 22.05 lbs

MRR GF9 confirmed fitment for GT and GT PP

19x9.5 23.75 lbs

MRR M350 (mustang specific wheel)

19x10 ~ 23.5 if not less
19x11 ~ 24.9

MRR VP5 confirmed fitment for GT and GT PP

19x9.5 29.35 lbs

Forgestar CF5V confirmed with in house weighing confirmed fitment for GT and GT PP

19x10 23.3 lbs
19x11 22.6 lbs

18" wheels

TE37

18x9.5 18.4 lbs

18x10 ( confirmed to fit GT PP)

FF15

18x10
18x10.5

Forgstar CF5 ( confirmed fitment for GT and GT PP)

18x10 ~ 24.9 lbs

here is the link to our official wheel weight thread.

http://www.mustang6g.com/forums/showthread.php?t=18164

Thanks. Does this mean the 10 inch wide F14 does not fit in the front in 19's or 20's?

The Rohana (20x10 -F) and MRR FS01 (19x10 - F) looks very very nice.

 

[Need4SpeedMotors]

So does that mean the 19x19.5 RPF1 works and fits on the PP cars? If you say yes it'll make my day.

I cant confirm that just yet but hopefully soon

Thanks. Does this mean the 10 inch wide F14 does not fit in the front in 19's or 20's?

The Rohana (20x10 -F) and MRR FS01 (19x10 - F) looks very very nice.

F14 in 19x10 yes it does, but the f14 does not come in a 20x10 they come in a 20x9.5 then. 20x10.5 and forgestar recommends a 20x9.5

Both rohana and the fs01 are amazing the fs01 also comes in a 20x10 and 20x11 fitmenr as well.

 

[valentinoamoro]

Any update on the 20x10 FS01 and weight? Will it work for square setup? Good tires choices in the 20 diameter, 285 width 35 sidewall size.

 

[Need4SpeedMotors]

Any update on the 20x10 FS01 and weight? Will it work for square setup? Good tires choices in the 20 diameter, 285 width 35 sidewall size.

just setup MellowYello06 on a setup today actually !

20x10 24.25 lbs
20x11 25 lbs

with the offset I cut for him it came out badass flush and perfect with a set of 285/315 Toyo R888 !

 

[Competition Orange]

Here's an option for a 18X10 squared setup that I have my eye on.

- Apex EC-7
- 22lbs
- 18 x10
- $330

It appears they are looking for test fitments and will have these available at some point for the S550.

http://www.apexraceparts.com/apex-products/Mustang/18x10-ET43-APEX-EC-7-Mustang-Wheel.html#.VgLgDJebHXE

Has this wheel been confirmed fit on the GT PP yet?

Sponsored