CJ Pony Parts
Well-Known Member
- Joined
- Dec 21, 2015
- Threads
- 151
- Messages
- 1,290
- Reaction score
- 404
- Location
- Harrisburg, PA
- Website
- www.cjponyparts.com
- Vehicle(s)
- A large variety of Mustangs across all generations
- Thread starter
- #1
Roush 700 Horsepower Phase 1 Supercharger Kit for all 2018 5.0L Mustangs.
In this video, Bill will show you how to install the new Roush Supercharger Kit on your 2018 5.0L Mustang.
[ame="[MEDIA=youtube]ElAGkp4ydeQ[/MEDIA]"]
Raw power is just an install away for your 2018 5.0L Mustang. Roush delivers an impressive 700 Horsepower and 610 lb-ft of Torque with this badass Phase 1 Supercharger kit.
Compatible with your Manual or Automatic tranmission model, this kit features everything needed for an OEM installation on your 2018 Mustang GT. Intake, injectors, cold air kit, the supercharger itself, and everything necessary for a high-end install, this kit has it all.
TVS R2650 is at the heart of this supercharger kit at only twelve pounds of boost, making the 700HP easily in its larger design.
After the better part of a weekend, and closely following these video instructions you'll be back on the road in no time.
Tech Tips:
- 5W50 oil is required after installation.
- The use of fuel additives (i.e. octane boosters) is NOT recommended.
- Premium fuel (91 octane or higher) is required to prevent “spark-knock” or detonation under certain operating conditions.
- Operating your engine without the Roush PCM recalibration will result in engine damage or failure and will void your warranty.
*A 3-year/36,000-mile Limited Powertrain Warranty is included but ONLY when properly installed by a Ford dealer or an Automotive Service Excellence-certified technician.
Please Note: This Kit and the included Roush Calibration is NOT compatible with any 2018 5.0L Mustang meant for distribution outside of North America.
Order the Roush 700 Horsepower Phase 1 Supercharger Kit (P/N: 422090) for your 2018 5.0L Mustang from CJ Pony Parts today!
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
In this video, Bill will show you how to install the new Roush Supercharger Kit on your 2018 5.0L Mustang.
[ame="[MEDIA=youtube]ElAGkp4ydeQ[/MEDIA]"]
Raw power is just an install away for your 2018 5.0L Mustang. Roush delivers an impressive 700 Horsepower and 610 lb-ft of Torque with this badass Phase 1 Supercharger kit.
Compatible with your Manual or Automatic tranmission model, this kit features everything needed for an OEM installation on your 2018 Mustang GT. Intake, injectors, cold air kit, the supercharger itself, and everything necessary for a high-end install, this kit has it all.
TVS R2650 is at the heart of this supercharger kit at only twelve pounds of boost, making the 700HP easily in its larger design.
After the better part of a weekend, and closely following these video instructions you'll be back on the road in no time.
Tech Tips:
- 5W50 oil is required after installation.
- The use of fuel additives (i.e. octane boosters) is NOT recommended.
- Premium fuel (91 octane or higher) is required to prevent “spark-knock” or detonation under certain operating conditions.
- Operating your engine without the Roush PCM recalibration will result in engine damage or failure and will void your warranty.
*A 3-year/36,000-mile Limited Powertrain Warranty is included but ONLY when properly installed by a Ford dealer or an Automotive Service Excellence-certified technician.
Please Note: This Kit and the included Roush Calibration is NOT compatible with any 2018 5.0L Mustang meant for distribution outside of North America.
Order the Roush 700 Horsepower Phase 1 Supercharger Kit (P/N: 422090) for your 2018 5.0L Mustang from CJ Pony Parts today!
Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.
Sponsored
Last edited: