Roush axle back users any?

[berserker_sid]

So guys is anyone using only ROUSH axle back .. if yes how are they and how is the sound?

I want first hand owner review

Sponsored

 

[kevg73]

There is a fair amount of discussion about it in the exhaust thread. A couple clips as well:

http://www.mustang6g.com/forums/showpost.php?p=454358&postcount=400
http://www.mustang6g.com/forums/showpost.php?p=464046&postcount=449

 

[berserker_sid]

There is a fair amount of discussion about it in the exhaust thread. A couple clips as well:

http://www.mustang6g.com/forums/showpost.php?p=454358&postcount=400
http://www.mustang6g.com/forums/showpost.php?p=464046&postcount=449

Yes but its is pretty confusing there.. i mean two videos which i saw on youtube... i made separate thread so someone who is using can give an elaborate review u know

 

[Eco15]

I've had mine about a week. It's not bad, have had a few people compliment me on it. I have a JTL intake as well.

I'm not sure i'll ever be fully happy with the sound coming out of this car, but you can definitely hear the turbo come through. No drone driving at any speed that I have noticed. It doesn't sound bad... I'll hopefully have some better videos up this weekend, but it depends how much snow we get.

 

[YellowBee]

I was the first real hand to get them. I have 5 video clips on Youtube. Next week I'll have the off-road downpipe added.

 

[KazyMedic]

I was the first real hand to get them. I have 5 video clips on Youtube. Next week I'll have the off-road downpipe added.

I will have the same with a MAP tune. I was the one that commented on your youtube channel. I really like the way the roush's sound. I can only imagine it getting better. I am still contemplating the stock resonator delete. I don't want it to rattle my brain inside the car like my BRZ exhaust did.

 

[Nihil]

i have been considering the roush axle back and then removing the stock resonator with a strait y pipe. i would love to hear the setup before i jump on that boat and sink the money. Only full exhaust ive considered is the stainless works one...but 1000 bucks for a catback....ehh.

 

[YellowBee]

The quality of keeping the sound out of these cars is amazing. I highly doubt you'll get annoyed with the sound. It still sounds like stock from inside the car. I'll have inside videos and outside videos of the downpipe added.

 

[berserker_sid]

I was the first real hand to get them. I have 5 video clips on Youtube. Next week I'll have the off-road downpipe added.

yes yellow bee... i saw ur videos.. Brandon S... hehehe... but i want how do they sound and differenta re they from soick

 

[Kyle@ROUSH]

I take it you guys have seen this ?




That car belongs to one the engineers, which the same day we made that video i happened to catch him leaving after working while walking to my car. The roads were wet and he tore through a few gears on the way out and I was impressed honestly. It's a 4 cylinder engine, its going to sound like a 4 cylinder but i didnt feel like it was obnoxiously loud or anything it really doesnt sound bad at all despite what you will read online from the guys that dont want to accept there is a 4 cylinder Mustang now.

It's mandrel bent, 304 stainless. Take a look at comparable axle back kits, most are well over $700+ I've seen our dealers offering our kit for less than $550.

 

[cosmo]

I take it you guys have seen this ?




That car belongs to one the engineers, which the same day we made that video i happened to catch him leaving after working while walking to my car. The roads were wet and he tore through a few gears on the way out and I was impressed honestly. It's a 4 cylinder engine, its going to sound like a 4 cylinder but i didnt feel like it was obnoxiously loud or anything it really doesnt sound bad at all despite what you will read online from the guys that dont want to accept there is a 4 cylinder Mustang now.

It's mandrel bent, 304 stainless. Take a look at comparable axle back kits, most are well over $700+ I've seen our dealers offering our kit for less than $550.

I'll be doing a downpipe, so I'm mainly waiting to hear a Roush axleback exhaust that has had a downpipe installed as well, and maybe a resonator delete also. I'm thinking this system might get pretty loud, just want to hear how it sounds when it gets that loud.

 

[dragonacc]

I'll be doing a downpipe, so I'm mainly waiting to hear a Roush axleback exhaust that has had a downpipe installed as well, and maybe a resonator delete also. I'm thinking this system might get pretty loud, just want to hear how it sounds when it gets that loud.

Different cars I know, but I had the Roush axleback exhaust on my 5.0 and it sounded awesome. Then I removed the cats and it became obnoxiously loud. Basically they sound good but don't quiet the exhaust much.

 

[Kyle@ROUSH]

I personally havent heard one yet with a downpipe. I would feel safe saying that a downpipe and resonator delete would be a very loud setup though.

 

[Nihil]

I take it you guys have seen this ?




That car belongs to one the engineers, which the same day we made that video i happened to catch him leaving after working while walking to my car. The roads were wet and he tore through a few gears on the way out and I was impressed honestly. It's a 4 cylinder engine, its going to sound like a 4 cylinder but i didnt feel like it was obnoxiously loud or anything it really doesnt sound bad at all despite what you will read online from the guys that dont want to accept there is a 4 cylinder Mustang now.

It's mandrel bent, 304 stainless. Take a look at comparable axle back kits, most are well over $700+ I've seen our dealers offering our kit for less than $550.

For the prices of axle backs on the mustangs you can get 304 catbacks for other performance cars.

http://gctuner.com//index.php?main_page=product_info&cPath=21_34&products_id=622

https://www.modernperformance.com/p...tion_03-05_Neon_SRT4/neonsrt4_exhaust_systems

http://www.cjponyparts.com/mbrp-cat...ign=shopping&gclid=CNKfvMrK_sMCFYMjgQodyA4Aow

http://www.protuninglab.com/12scfrs...googlepepla&utm_medium=adwords&id=86425746746

http://autoplicity.com/482018-invid...ModelFitment&gclid=CKqahvfL_sMCFQpk7Aodoi4AnA


Full catbacks for around $500, most 304 or 409 stainless for similar priced performance cars, selling axle-backs for 500-700 is completely bonkers, they are massively marked up for companies to rake in the profit. those axle backs should be about $250-300 considering what little bit of product you actually get.

Just like that turbosmart bov...other cars they selling it for $150, the one out for mustangs that's basically the same size and design...$250-300.

 

[scoobydoonut]

I have the Roush AB on my 2015 GT I had them on my 2012,2013,and 2014 so I just had to have them on my 15 it's sounds pretty close to me but not the same I'm gonna go with a resonator delete with H pipe next

Sponsored