djcwardog
V8 Driver
- Joined
- Jun 27, 2017
- Threads
- 2
- Messages
- 94
- Reaction score
- 31
- Location
- Central KY
- Vehicle(s)
- 2016 Mustang GT Base with PP
- Thread starter
- #1
I want to add LKA to get AHB (both seem to have been offered first on the 2018’s) along with rain sensing wipers but I’m not worried about adding ACC or the new side mirrors used for BLIS.
I’ve run plenty of searches but not yet found a definitive parts list and wiring mods needed to add this combination of features to my 2016 GT Base. I did find the excellent write up on retrofitting the rain sensing wipers.
https://www.mustang6g.com/forums/threads/adding-oem-rain-sensing-wipers.86047/
Parts called out in that thread include these:
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-rain-sensor-cover-bl3z17d550a
https://parts.autonationfordwhitebe...ford-processor-windshield-rain-se-lu5z17d547b
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-wiring-assembly-fr3z14b242c
Reading about people wanting to retrofit LKA and ACC it seems that adding auto high beams (AHB) would also require installing the camera used for LKA.
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-front-camera-jr3z19g490a
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-wire-connector-3u2z14s411ajd
With a new windshield being needed to obtain the rain sense module bracket, it seems the yet another variation of a new windshield is called out when you want both the rain sense module and the LKA camera mounted. However, the only different part # I saw was if you have the collIsion warning HUD. So, here’s the rain sense windshield that seems to be same part across the 2016-2020 cars at least.
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-windshield-fr3z6303100j
Not sure yet about a cover for or how to mount that LKA camera though. Does it mount under the rear view mirror itself?
You also require another variation of the SCCM because those used with LKA have a push-button on the end of the left stalk to turn on/off the LKA. Here’s the SCCM for LKA/heated wheel/rain sense wipers.
https://parts.autonationfordwhitebe...-housing-assembly-steering-column-jr3z3f791db
I also see a choice of rear view mirrors for 2018+ cars with rain sense wipers. The rain sense DIY linked above didn’t require a new rear view mirror, so maybe this one is the version to mount the LKA camera as well?
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-mirror-inside-ju5z17700a
So, if doing the rain sense wipers anyway, any help for adding the LKA along with (and in order to get AHB) the automatic dimming feature for our high beams?
I’ve run plenty of searches but not yet found a definitive parts list and wiring mods needed to add this combination of features to my 2016 GT Base. I did find the excellent write up on retrofitting the rain sensing wipers.
https://www.mustang6g.com/forums/threads/adding-oem-rain-sensing-wipers.86047/
Parts called out in that thread include these:
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-rain-sensor-cover-bl3z17d550a
https://parts.autonationfordwhitebe...ford-processor-windshield-rain-se-lu5z17d547b
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-wiring-assembly-fr3z14b242c
Reading about people wanting to retrofit LKA and ACC it seems that adding auto high beams (AHB) would also require installing the camera used for LKA.
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-front-camera-jr3z19g490a
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-wire-connector-3u2z14s411ajd
With a new windshield being needed to obtain the rain sense module bracket, it seems the yet another variation of a new windshield is called out when you want both the rain sense module and the LKA camera mounted. However, the only different part # I saw was if you have the collIsion warning HUD. So, here’s the rain sense windshield that seems to be same part across the 2016-2020 cars at least.
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-windshield-fr3z6303100j
Not sure yet about a cover for or how to mount that LKA camera though. Does it mount under the rear view mirror itself?
You also require another variation of the SCCM because those used with LKA have a push-button on the end of the left stalk to turn on/off the LKA. Here’s the SCCM for LKA/heated wheel/rain sense wipers.
https://parts.autonationfordwhitebe...-housing-assembly-steering-column-jr3z3f791db
I also see a choice of rear view mirrors for 2018+ cars with rain sense wipers. The rain sense DIY linked above didn’t require a new rear view mirror, so maybe this one is the version to mount the LKA camera as well?
https://parts.autonationfordwhitebearlake.com/oem-parts/ford-mirror-inside-ju5z17700a
So, if doing the rain sense wipers anyway, any help for adding the LKA along with (and in order to get AHB) the automatic dimming feature for our high beams?
Sponsored
Last edited: