Requesting image of lowering springs on stock tires and wheels

[jbanh100]

Trying to get an idea what steeda ultralites 1 inch would look like on black accent wheels on stock tires (255/40/19). Thanks

Sponsored

 

[Vstang2]

Trying to get an idea what steeda ultralites 1 inch would look like on black accent wheels on stock tires (255/40/19). Thanks

Had these put on today , Steeda progressives with pro-active shocks ( Comfort package ). I have the wheels and tires you mentioned.

 

[tj@steeda]

Thank you, Jason

 

[ChrisS550NY]

Not sure if you needed another photo but this is a 1" drop on SR progressive rate springs
20 inch factory wheels

Hope this helps

 

[ChrisS550NY]

1 inch spacers in the front and 1/2 inch in the rear
No problem with rubbing even if I had 1" in the rear I had no issues

 

[Roadway 5.0]

Steeda Ultralites with a 1/4” spring spacer in the rear (raises rear 0.5”); stock PP wheels:

Edit: here’s another shot. Color grading is horrendous, but you can really see the wheel gap well:

 

[Momogt26]

1 inch spacers in the front and 1/2 inch in the rear
No problem with rubbing even if I had 1" in the rear I had no issues

Which 1/2 inch spacers did you use on the rear and did you have to grind down the wheel studs

 

[ChrisS550NY]

I used the Ebiach 1/2 hub centric
But I did convert to longstuds in the rear
But at 1 time I had 1" bolt on spacers with there own studs on the rear no grinding at all

Please see attached

 

[nomorework]

Vstang 2 what do you think of the ride with that package installed?

 

[ChrisS550NY]

On my car I have
Koni yellows on all 4 corners ( adjustable).
Ebiach sway bars front and rear
SR springs ( 1 " drop ) no rake
On 20 " wheels
BMR subframe connectors
Bmr vertical links
Solid lower control arm bearings
Wheel spaces

Car handles great / little stiff as I have all settings on med / middle setting

The car is great at high speeds fully in control
( 120 140 MPH highway pulls )

The car is very rigid as it will Teeter on 2 wheels when pulling into a driveway on an angle

Are you the only thing I regret doing because i drive the car every day is I did BMR solid billet Carrier bearings I feel like I'm driving a go kart as you hear every driveline noise

 

[Blacktop17]

steeda springs, spacers- 25mm front 20mm rear

Sponsored