Replacing grille emblem

[CrummyArchitect]

so I bought the black UPR pony and GT for the grille and deck lid panel, and was researching all over (this forum, you tube, websites) and I know I seen it before I decided to do this, but I can't find where if you need to take the front bumper completely off just to get the grille out to replace the emblem. If anyone has done this and can give me some guidance, it would be appreciated.

P.S. I've only just now decided to do this as I've given up hope on the RTR grille and deck lid panel coming out this year, which is what I want to replace them with. So in the meantime I'm just doing the blacked out look.

Sponsored

 

[Chameleon]

Front bumper here.

http://www.mustang6g.com/forums/showthread.php?t=28236

 

[Cloak]

You don't need to remove the front bumper to replace the pony!

Just take off the radiator cover, reach down and brake the tabs off the chrome pony. Replace with new one. Re-install radiator cover.

 

[CrummyArchitect]

You don't need to remove the front bumper to replace the pony!

Just take off the radiator cover, reach down and brake the tabs off the chrome pony. Replace with new one. Re-install radiator cover.

Oh good! I was hoping that was the case.

 

[shobbs007]

The complete emblem guide...

http://www.mustang6g.com/forums/showthread.php?t=21708&highlight=emblem

 

[CrummyArchitect]

The complete emblem guide...

http://www.mustang6g.com/forums/showthread.php?t=21708&highlight=emblem

This was the thread I originally saw I think - I follow this users build on this forum, I should have thought to go back and check his other posts. Thanks!

Sponsored