Rear suspension torque specs

[Legionofone]

Does anyone have the torque specs for most of the rear suspension, doing an install of steeda stuff and I don't have all the specs.

Sponsored

 

[ForTehNguyen]

steeda usually lists torque specs in their instructions

 

[Phillip123]

Do you have their instructions near you? I think there's a pdf available

 

[Legionofone]

I do, but they don't have the specs for the lower shock. And would like a double check if possible.

 

[ForTehNguyen]

From a BMR installation guide

Lower shock bolts: 35 ft/lbs.
Lower vertical link bolt: 129 ft/lbs.
Rear inner lower control arm bolts: 184 ft/lbs.
Front inner lower control arm bolts: 166 ft/lbs.
Outer lower control arm bolts: 203 ft/lbs

 

[jabrax]

From a BMR installation guide

Lower shock bolts: 35 ft/lbs.
Lower vertical link bolt: 129 ft/lbs.
Rear inner lower control arm bolts: 184 ft/lbs.
Front inner lower control arm bolts: 166 ft/lbs.
Outer lower control arm bolts: 203 ft/lbs

Assuming these are specs for the rear control arm assemby.

** passenger side ** facing the assembly

which is rear inner vs outer? .... left or right

 

[CrazedAntelope]

Is there a book or service manual you can buy for these cars?

 

[redline727]

I torqued all mine to FNtight ft/lbs not sure the conversion to Nm though...

Sponsored