- Thread starter
- #1
Doing a little testing!!
Our previous best with 11.5:1 Compression on the 18 was 1045 with the jtb. (in 7th gear) The ysi on our 15 made 1102, that was the highest dyno we had ever had on a non gear drive centri in house on a coyote.
The 1045, after swapping to our custom 15" setup with our aed knuckles and 15x11 with the radial pro actually showed less on the dyno, only about 990 rwhp. (in 7th gear) The dyno never likes radial pro's.
With the new comp cams and only 10:1 Compression "with" the radial pro's on the car, we were able to knock down 1141 rwhp today. In 6th gear......which we know typically reads about 50 less at this power level. Were trying to save the trans for TX2k.
We held the overall 10r80 blower record for about 4 months, but got knocked down to the quickest cenri last month (we never get that good air to play in being in ohio). I gotta start heading south during these great air months.
Needless to say, really happy with the numbers, and really happy with the testing on our Vortech. We're also expecting some lower iat's with what were trying out.
Can't let all the cats outta the bag, but in due time. Were also testing out the new suncoast bolt together unit. This converter is a complete from the ground up design. The stall is pretty radical for our centri setup. I'm hoping for a 6500-7000 rpm flash on the hit!!!!!!!! LOL
Our best 60' before was a 1.29 with a 2nd gear leave with a centri with the Circle D unit. Very pleased with that, This thing is gonna pull like crazy on the big end too. Wish us luck next week! 16.5 hr drive to get after some racing!!!
Our previous best with 11.5:1 Compression on the 18 was 1045 with the jtb. (in 7th gear) The ysi on our 15 made 1102, that was the highest dyno we had ever had on a non gear drive centri in house on a coyote.
The 1045, after swapping to our custom 15" setup with our aed knuckles and 15x11 with the radial pro actually showed less on the dyno, only about 990 rwhp. (in 7th gear) The dyno never likes radial pro's.
With the new comp cams and only 10:1 Compression "with" the radial pro's on the car, we were able to knock down 1141 rwhp today. In 6th gear......which we know typically reads about 50 less at this power level. Were trying to save the trans for TX2k.
We held the overall 10r80 blower record for about 4 months, but got knocked down to the quickest cenri last month (we never get that good air to play in being in ohio). I gotta start heading south during these great air months.
Needless to say, really happy with the numbers, and really happy with the testing on our Vortech. We're also expecting some lower iat's with what were trying out.
Can't let all the cats outta the bag, but in due time. Were also testing out the new suncoast bolt together unit. This converter is a complete from the ground up design. The stall is pretty radical for our centri setup. I'm hoping for a 6500-7000 rpm flash on the hit!!!!!!!! LOL
Our best 60' before was a 1.29 with a 2nd gear leave with a centri with the Circle D unit. Very pleased with that, This thing is gonna pull like crazy on the big end too. Wish us luck next week! 16.5 hr drive to get after some racing!!!
Sponsored