Pushing the Procharger HO Kit to 700RWHP

[AdrianMAK]

Not sure , I need a good boost gauge , the dash gauge only goes to 3 PSI and stops ! ...You are on a 3.60 pulley and I'm on a 3.50 , so maybe a pound more than you if I was shifting at 7300 like you are ?.. Now that we have the fuel we need the tuner is going to raise my shift points .. The extra RPM should help because right now set at 7k the car noses over a bit when shifting to 3rd and 4th gear ..

Get one of these before you get the car tuned. So you knock everything tune related out at once.

http://www.makperformance.com/2015-...-Pipe-Kit-for-HO-Supercharger-Kits_p_561.html

Sponsored

 

[z06psi]

Get one of these before you get the car tuned. So you knock everything tune related out at once.

http://www.makperformance.com/2015-...-Pipe-Kit-for-HO-Supercharger-Kits_p_561.html

Any idea on time for the Stage II?

 

[AdrianMAK]

Any idea on time for the Stage II?

Should have final fitment on Monday and then it will be about two weeks before they are ready to ship.

 

[ProChargerTECH]

Any idea on time for the Stage II?

Our "hardbody" inlets should be just around the corner, just a heads up.
For use with HO/STG2 and even F-blowers.

They have been delayed months, due to a vendor hang up that makes them for us. But I hear the end is in sight...

 

[z06psi]

Should have final fitment on Monday and then it will be about two weeks before they are ready to ship.

Our "hardbody" inlets should be just around the corner, just a heads up.
For use with HO/STG2 and even F-blowers.

They have been delayed months, due to a vendor hang up that makes them for us. But I hear the end is in sight...

Lol

 

[ProChargerTECH]

Lol

MAK makes a very nice piece...
Without I doubt I believe everything they have claimed....
Great unit at a great price point.

Though it goes without saying we have had plans in place for our rotomolded inlet, since day one... (Just look at all our other systems, like C7 etc. BUT, there has been MAJOR delays with vendors that make them for us.

We recently got our items for a couple other platforms (C7 Race System) and I am told the Mustang isn't far out either.

Gotta think, we don't make them one off.... we order MASSIVE quantities of these things. Seems at times, that chokes up some people's operations. LOL.

 

[z06psi]

Oh I understand I just found it funny.

Rotomolded. Is it a hard tube plastic elbow? 4" with a larger filter?

 

[ProChargerTECH]

Oh I understand I just found it funny.

Rotomolded. Is it a hard tube plastic elbow? 4" with a larger filter?

Yes sir, it was intended for the larger head units in mind.

 

[smokinzx14r]

Get one of these before you get the car tuned. So you knock everything tune related out at once.

http://www.makperformance.com/2015-...-Pipe-Kit-for-HO-Supercharger-Kits_p_561.html

I agree with that .. Problem is money out weighs needs right now ..:(

 

[smokinzx14r]

Our "hardbody" inlets should be just around the corner, just a heads up.
For use with HO/STG2 and even F-blowers.

They have been delayed months, due to a vendor hang up that makes them for us. But I hear the end is in sight...

I'll be happy to be a test dummy on this new hardbody inlets ..I'll take to the dyno , same day and test it back to back ..

 

[AdrianMAK]

Ill just leave this here...

Thread coming soon... Lets just say we made a little more than 700RWHP.

Uncorrected Numbers:

 

[diablomatt]

when you tuning and p1x car and dont even know it.... smh

 

[AdrianMAK]

http://www.mustang6g.com/forums/showthread.php?p=1758365#post1758365

Sponsored