my66coyote
Member
- Thread starter
- #1
I have a genII Coyote crate motor in my 66 with a Stage 2 procharger kit. I'm swapping out to an HD/green belt and when I took the idler pulley off it has rubbed pretty significantly on the factory idler pulley. From what I can tell, I had it correctly installed.
I did remember when I originally put the kit on, when tightening that pulley down, it would bind up with the factory pulley so I backed off the bolt a tad. Is it supposed to spin independently from the other belt/pulley?
Am I missing a spacer, washer, etc..
I did remember when I originally put the kit on, when tightening that pulley down, it would bind up with the factory pulley so I backed off the bolt a tad. Is it supposed to spin independently from the other belt/pulley?
Am I missing a spacer, washer, etc..
Sponsored