Sponsored

Toy Cobra

Well-Known Member
Joined
Jan 28, 2018
Threads
10
Messages
422
Reaction score
363
Location
Texas
Vehicle(s)
2018 GT
I set out with one goal going into TX2K and that was to make the Elite 16. Ended up qualifying #12 out of the roughly 125 entires in the street car class. Keep in mind this is a true street car with radio, heat, A/C, power steering, etc… weighing in at close to #3800. The Procharger F1a-94 made huge power on the dyno and it has translated into a best of 7.80 and 181mph on only its 3rd track appearance. Who says a centri street blower can't run with the big boys!
70039DB4-CA85-4605-89EE-93F221813140.jpeg
661B07B2-0C8D-4245-A5D5-440D969FFB4C.jpeg
2061463F-A0EA-4BA4-B1E6-0156C944A4FD.jpeg
FB47A5C3-28F5-4B52-B25A-875F68D032CA.jpeg
5D3B373C-58B6-47B2-9EF3-F504BED18CCC.jpeg
62D238F5-E883-4371-BA36-A876FFC7D09C.jpeg
Sponsored

 

Jimmy Dean

Well-Known Member
Joined
Jul 26, 2019
Threads
30
Messages
2,029
Reaction score
2,411
Location
Baton Rouge
First Name
Al
Vehicle(s)
71 mach 1, 82 Bronco, 86 Bronco (dd),
I see a lot of mustangs on that list. and that's damn impressive. nice job. A10 I assume?
 

Kennysum1

Well-Known Member
Joined
Jun 30, 2021
Threads
9
Messages
235
Reaction score
185
Location
Huntsville, Alabama
First Name
Kenny
Vehicle(s)
2017 Alfa Romeo Quadraflio, 2018 TT GT Prem, 22 GT
What do you have your suspension set at? Rebound and stuff.
 

Sponsored

Kennysum1

Well-Known Member
Joined
Jun 30, 2021
Threads
9
Messages
235
Reaction score
185
Location
Huntsville, Alabama
First Name
Kenny
Vehicle(s)
2017 Alfa Romeo Quadraflio, 2018 TT GT Prem, 22 GT
I do have Viking shocks/coil overs on this car and the settings very depending on the track and conditions.
Car is currently down. I think I busted the oil pump gears but waiting to finish tearing it down.

I am struggling to get it to hook around the 1000 HP range. Running a 2 step/transbrake taking off at around 3100 RPMS @ 3.5 PSI of boost. Shifts into second and either breaks completely loose once the boost kicks in fully or get some wheel hop and have to let out.

Running BMR drag springs/chassis lockout and viking crusaders.

Do you take off in first or do the 2nd gear take off and slap it into drive?

Beautiful car.
 

LSchicago

Well-Known Member
Joined
May 11, 2018
Threads
92
Messages
2,929
Reaction score
2,535
Location
Illinois
First Name
Lloyd
Vehicle(s)
2018 Mustang GT/A 301A 5.0
I set out with one goal going into TX2K and that was to make the Elite 16. Ended up qualifying #12 out of the roughly 125 entires in the street car class. Keep in mind this is a true street car with radio, heat, A/C, power steering, etc… weighing in at close to #3800. The Procharger F1a-94 made huge power on the dyno and it has translated into a best of 7.80 and 181mph on only its 3rd track appearance. Who says a centri street blower can't run with the big boys!
70039DB4-CA85-4605-89EE-93F221813140.jpeg
661B07B2-0C8D-4245-A5D5-440D969FFB4C.jpeg
2061463F-A0EA-4BA4-B1E6-0156C944A4FD.jpeg
FB47A5C3-28F5-4B52-B25A-875F68D032CA.jpeg
5D3B373C-58B6-47B2-9EF3-F504BED18CCC.jpeg
62D238F5-E883-4371-BA36-A876FFC7D09C.jpeg
I somehow struggle to believe the stated 1100HP. LOL.
 

LSchicago

Well-Known Member
Joined
May 11, 2018
Threads
92
Messages
2,929
Reaction score
2,535
Location
Illinois
First Name
Lloyd
Vehicle(s)
2018 Mustang GT/A 301A 5.0
Car is currently down. I think I busted the oil pump gears but waiting to finish tearing it down.

I am struggling to get it to hook around the 1000 HP range. Running a 2 step/transbrake taking off at around 3100 RPMS @ 3.5 PSI of boost. Shifts into second and either breaks completely loose once the boost kicks in fully or get some wheel hop and have to let out.

Running BMR drag springs/chassis lockout and viking crusaders.

Do you take off in first or do the 2nd gear take off and slap it into drive?

Beautiful car.
That's A10 problems. He has a Turbo 400.
 
OP
OP

Toy Cobra

Well-Known Member
Joined
Jan 28, 2018
Threads
10
Messages
422
Reaction score
363
Location
Texas
Vehicle(s)
2018 GT
I somehow struggle to believe the stated 1100HP. LOL.
Car is currently down. I think I busted the oil pump gears but waiting to finish tearing it down.

I am struggling to get it to hook around the 1000 HP range. Running a 2 step/transbrake taking off at around 3100 RPMS @ 3.5 PSI of boost. Shifts into second and either breaks completely loose once the boost kicks in fully or get some wheel hop and have to let out.

Running BMR drag springs/chassis lockout and viking crusaders.

Do you take off in first or do the 2nd gear take off and slap it into drive?

Beautiful car.
Mine is a th400 so I leave in 1st. When I had a 10spd Rob at PBD had me set up with a second gear leave, 1st is to short. I also ran a Circle D N/A converter because you need it to flash up quick to get into the power. The boost converter it tighter more for a PD blower.
 

Sponsored

Jimmy Dean

Well-Known Member
Joined
Jul 26, 2019
Threads
30
Messages
2,029
Reaction score
2,411
Location
Baton Rouge
First Name
Al
Vehicle(s)
71 mach 1, 82 Bronco, 86 Bronco (dd),
Mine is a th400 so I leave in 1st. When I had a 10spd Rob at PBD had me set up with a second gear leave, 1st is to short. I also ran a Circle D N/A converter because you need it to flash up quick to get into the power. The boost converter it tighter more for a PD blower.
not familiar with building one of these as a strip car, why go with the TH400 over the A10? was under impression a built A10 could handle this level of power/abuse. if you wanted to minimize shifts, why not set the programming to only 3-4 specific gears at specific RPMs?
 

LSchicago

Well-Known Member
Joined
May 11, 2018
Threads
92
Messages
2,929
Reaction score
2,535
Location
Illinois
First Name
Lloyd
Vehicle(s)
2018 Mustang GT/A 301A 5.0
I was originally registered with my 2020 GT00 and they didn't get the info changed whe i swapped cars and classes. That being said I did make 1100hp at 7k rpms...
I did notice the 2020 was still on the ticket. I figured nothing was updated.
 
OP
OP

Toy Cobra

Well-Known Member
Joined
Jan 28, 2018
Threads
10
Messages
422
Reaction score
363
Location
Texas
Vehicle(s)
2018 GT
not familiar with building one of these as a strip car, why go with the TH400 over the A10? was under impression a built A10 could handle this level of power/abuse. if you wanted to minimize shifts, why not set the programming to only 3-4 specific gears at specific RPMs?
The 10r80 is great however at higher horsepower they just don’t hold up. I think that with more R&D they will be better in the future but for now they just don’t cut it.
 
 




Top