PP1 and PP2 Owners: Show us your after market Wheels!!

[Frank]

My car PP1 with Vossen wheels fronts are 20x9 and 30 offset the valve stem was hitting the caliber and had to be replaced with a shorter stem. Rears as you know were not a problem and are 20x10.5 45 offset.

Sponsored

 

[Luce202]

Sinn silver 20x10 45 offset. 285/30/20 front with 5mm spacer. 295/30/20 rear.

 

[R 350 gt Donson]

did not change the PP2 wheels but enhanced them Power coat black with white barrels and different tires Much smoother

 

[R 350 gt Donson]

the back

 

[Kermitz]

SVE SP2's in bronze.

Front:
Size: 19x10
Backspace: 6.88"
Offset: +35mm
Weight: 24.1lbs

Rear:
Size: 19x11
Backspace: 7.97"
Offset: +50mm
Weight: 24.5lbs

 

[Dusten]

Since the Mustang GT PP1 and PP2 have the larger 15" Brembo bakes up front, I thought it would be good to have a place to show the rims that fit and to see how great they look.

If you have a Mustang GT PP1 or PP2 or have Mustang with 15" Brembos on the front, show us your wheels!!!


NOTE: I was under the impression that the brakes got larger in 2018. If you have any S550 Mustang with the big 15" Brembo brakes with aftermarket wheels, please share them with us!!!

If you know, please indicate:

Rim Manufacturer
Model
Rim Diameter
Rim Width
Rim Offset

thanks

Frank

Vertini
Dynasty
20"
Front are 9" Rears are 10.5
Offset is F+38 and R+40

They do not clear the brakes. I had to run a 5mm spacer up front and longer studs.

 

[compprep]

Sinn silver 20x10 45 offset. 285/30/20 front with 5mm spacer.

Luc202: I just purchased some 19 x 10 +42 for sq setup knowing I'll need spacer in front. As 42 less than 45 I'll guess 5mm is plenty as that's all your using. Please advise where/what spacer you used as I read different opinions on what type is best to avoid balance issues? TIA!! Jim

 

[Luce202]

Luc202: I just purchased some 19 x 10 +42 for sq setup knowing I'll need spacer in front. As 42 less than 45 I'll guess 5mm is plenty as that's all your using. Please advise where/what spacer you used as I read different opinions on what type is best to avoid balance issues? TIA!! Jim

I used the eibach hub centric spacers and got them off their website. I had to file the inner ring out a bit because it was fitting so tight I didn’t think I would be able to get it off once installed. That being said, they are high quality and would order the same ones if I needed them again.

Sponsored