Epe_79
Member
Been a long wait but I ordered my VMS beadlocks then sent them out to get sand blasted and powder coated.....I think they came out just right!
Sponsored
Sponsored
Post Pix of your S550 with aftermarket wheels and tires
- Thread starter MELLOWYELLOW06
- Start date
- Watchers 814
sbella913
Active Member
looking at buying the same set up, did you buy the wheel and tire package from LMR and if so what tires did you get. i really like the stance and I am surprised the 275 in the rear seems to fill the wheel well thought I would have to go wider.
SEAICE
Well-Known Member
Some pics of my new Wheels and tires: Fondmetal STC-191s in silver. 20x9 +38 front and 20x10.5 +45 rear, with 255/35/20 and 305/35/55/20 BF Goodrich g-Force COMP-2 A/S Plus. I’m on stock height and the ride is fine and no rubbing whatsoever on stock alignment/camber. The wheels are from American Muscle and tire sizes are those recommended by American Muscle. Were I to do it again, I’d go with 40 series front tire, I’m sure there’s room. Also, the offset for the 9” fronts could be less, which looked a little too inboard in comparison to the rears which are to me, perfect. As pictured, I added 25mm spacers to the fronts effectively making the offset +13.
lew
Well-Known Member
PP1 replica's. I didn't care for the stock black one's guess I'm showing my age grew up around chrome, polished alum., and Michelin tires.
Sponsored
compprep
Well-Known Member
- Joined
- Apr 24, 2019
- Threads
- 17
- Messages
- 1,423
- Reaction score
- 5,156
- Location
- Utica, New York
- First Name
- Jim
- Vehicle(s)
- 19 GT PP1,1986 SVO, 2020 Ridgeline(SOLD!)
19 x 10 +40 ET, Forgestar CF5 in silver. 275/40-19 PS4 all around, with a 5mm spacer in front. The front tire in VERY close to the shock. Stock ride ht until I get all the Steeda parts I have installed.
SEAICE
Well-Known Member
Spacers all over ebay or Amazon.Need spacers for front, but no one has any lol
19x9 front +30 and 19x10.5 rear +35
ninjacoupe
Well-Known Member
- Joined
- Aug 10, 2018
- Threads
- 1
- Messages
- 126
- Reaction score
- 123
- Location
- Patchogue NY
- First Name
- Sam
- Vehicle(s)
- 2018 Mustang gt
Pierangiolo
Active Member
what is the width and diameter of the rears. Im thinking of going 10.5 in the back so I have the option to either go with a 305 or a 315Weld S71
Sponsored
shogun32
Well-Known Member
- Joined
- Feb 8, 2019
- Threads
- 89
- Messages
- 14,682
- Reaction score
- 12,216
- Location
- Northern VA
- First Name
- Matt
- Vehicle(s)
- '19 GT/PP, '23 GB Mach1, '12 Audi S5 (v8+6mt)
- Vehicle Showcase
- 2
then you want 11's. 305/30 on 10.5 is borderline. 275-305 is the range for 10.5" generally.
ninjacoupe
Well-Known Member
- Joined
- Aug 10, 2018
- Threads
- 1
- Messages
- 126
- Reaction score
- 123
- Location
- Patchogue NY
- First Name
- Sam
- Vehicle(s)
- 2018 Mustang gt
These are weld 71LP7100A80F. 17x10 with a 7.9 back spacing. That picture has the 315/50/17 M/T ET street R tires. You have to run BMR minimum drop drag springs (pictured) or stock springs to clear the height.
Here it is with the 305/45/17 on Ford 1 inch drop “street” springs
it would probably be faster at the track with the 305 being a lighter tire. On the street the taller 315s hook much better for me. I have 3:55 rear gears on A10. If you have the 3:15 rear gears it might be too much of a drop.
Last edited:
bellamor
Member
Looking for some wheel ideas for my Stang. I am thinking about getting a two-tone wheel from 4wheelonline, but the wide variety of options left me confused. Which are some of the best brands to take into consideration?
