Post Pix of your S550 with aftermarket wheels and tires

[shogun32]

just order in a 20x10 35mm offset doesn't give me fits with center caps.....ughhhhhh

You might need a 3mm spacer if the caps are fighting you. the hub's lip is 9mm tall. and if MRR recessed the cap mount too far, you'll hit that lip before the tangs can find purchase. You might be able to tap them in with a soft-blow hammer or deal with the caps before you mount to the hub. Some persuasion with a screw driver may work. You'd hope MRR would have designed around the protrusions, but maybe they recycled S197 dimensions and didn't check the S550 hubs.

Sponsored

 

[CraigJ]

SVE R350 19x10 285/35 & 19x11 325/30 View attachment 422639 View attachment 422640 View attachment 422641

 

[Allmotor]

man i hope those MRR M600's i just order in a 20x10 35mm offset doesn't give me fits with center caps.....ughhhhhh not what you wanna hear right after purchasing them. i know different wheel but now biting nails

You might need a 3mm spacer if the caps are fighting you. the hub's lip is 9mm tall. and if MRR recessed the cap mount too far, you'll hit that lip before the tangs can find purchase. You might be able to tap them in with a soft-blow hammer or deal with the caps before you mount to the hub. Some persuasion with a screw driver may work. You'd hope MRR would have designed around the protrusions, but maybe they recycled S197 dimensions and didn't check the S550 hubs.

Are those that are having trouble with installing center caps putting them on after the wheel is mounted? If so put the center cap on first. Then mount the wheel.

 

[Stage_3]

Looks great!!

 

[myblkshadow19]

You might need a 3mm spacer if the caps are fighting you. the hub's lip is 9mm tall. and if MRR recessed the cap mount too far, you'll hit that lip before the tangs can find purchase. You might be able to tap them in with a soft-blow hammer or deal with the caps before you mount to the hub. Some persuasion with a screw driver may work. You'd hope MRR would have designed around the protrusions, but maybe they recycled S197 dimensions and didn't check the S550 hubs.

according to darren it should not be a problem with this wheel, but nonetheless will see, probably won't be till feb or so before i have tires anyway.

 

[myblkshadow19]

SVE R350 19x10 285/35 & 19x11 325/30 View attachment 422639 View attachment 422640 View attachment 422641

looks damn good.. exact same specs as what i ordered other than in a 20" wheel. and did that strictly because of the tire selection, sat on this computer better part of half my day looking for 19's as far as tires go and noticed without a drop how much sidewall and overall diameter i was loosing so i wanted to be able to keep that close.

 

[Ctb_1]

HRE FF01’s, super happy with the change from the factory performance pack wheels

 

[ElCid08]

question for those that have done both a wider wheel tire combo. any negatives you can think of? steering and or turn radius changed, frontend have any clearance issues? rubbing etc....thanks

Running a 20x10 front wheel, and 20x11 rear with 275 front, and 305 rear tires. Zero rubbing, steering, or turning issues. Even at full lock.

 

[Deleted member 35775]

Running a 20x10 front wheel, and 20x11 rear with 275 front, and 305 rear tires. Zero rubbing, steering, or turning issues. Even at full lock.

i'm running a similar wheel setup with 285/35/20 on the front and 305/35/20 on the rear. no rubbing or mechanical steering/turning issues. it took me a few weeks, tho, to get accustomed to a different, tighter turning radius.

 

[Norritt]

Hi All!

Added these Velgen VMB7's to the Mustang yesterday. 20x9 +32 / 20x10.5 +45

New Tires = Nitto 555 G2 - Fronts 275, 35, 20 / Rears 305, 35, 20

Stock suspension in need of a drop. Ordered a set of Steeda springs today.

Thanks for looking!

 

[myblkshadow19]

Hi All!

Added these Velgen VMB7's to the Mustang yesterday. 20x9 +32 / 20x10.5 +45

New Tires = Nitto 555 G2 - Fronts 275, 35, 20 / Rears 305, 35, 20

Stock suspension in need of a drop. Ordered a set of Steeda springs today.

Thanks for looking!

awesome! can't wait to see it with a drop

 

[SDStang06]

Excuse the dirty car but I couldn't wait for a wash to post pics. Couldn't be happier with my choice. Shout-out to @SoCalTim for an awesome setup and and nice guy to work with.

Forgestar CF-10 Deep Concave
20x9.5 +29
20x11 +56

 

[myblkshadow19]

Excuse the dirty car but I couldn't wait for a wash to post pics. Couldn't be happier with my choice. Shout-out to @SoCalTim for an awesome setup and and nice guy to work with.

Forgestar CF-10 Deep Concave
20x9.5 +29
20x11 +56

looks damn good! what size and brand tires? lowered or stock suspension?

 

[SDStang06]

looks damn good! what size and brand tires? lowered or stock suspension?

Thanks man! Lowered with Eibachs. Firehawk Indy 500s, 275/35 305/35

 

[myblkshadow19]

Thanks man! Lowered with Eibachs. Firehawk Indy 500s, 275/35 305/35

just got my20x10 and 20x11's in friday. trying to determine which tire to go with. probably going with same tire setup as yours or maybe a 285 in the front. have not made a final decision yet. how's the firehawks compared to stock? i have the stock mp4s still on mine. only owned it 7months now.

Sponsored