So long as the treadmill itself is hustling along the ground at V1 or higher, no problem...So. If a plane is on a treadmill will it take off?
If your knees bent the other way, what would a chair look like?So. If a plane is on a treadmill will it take off?
It's not for house wives...I have some tech for you guys. Although I don't have a GT350, I did find out while I was at Shelby America in Las Vegas, Carrol Shebly did not like the Gt350. That particular car was designed for the house wives that wanted a mustang. He actually tried to scrap the project. He hated everything about it.
The owner of the very 1st GT350 is believe to live in Colorado. The car was bought for 2 mil...
Not when they were new you couldnāt. ADM on every single GT350 I could find.dude if you can get a well optioned GT you can get a GT350.
i think maybe you got that backwards
Milwaukeeee!!!!Hey, my favorite motorcycle uses a single pin crank, 45 degree bank angle, has a 315-405 degree firing angle, weighs a ton, has inadequate brakes, wobbles at speeds over 90 Mph, doesn't like to hot soak and start, engine makes more noise than 3 coyote's.
I wouldn't trade it for any other motorcycle in the world and I've rode most of them.
Harley's are Milwaukee vibrators. Chicks love them.
GT350's are Detroit vibrators, do chicks love these?
Ok, let me know what you find out though. I went on the tour and the lady gave a little history lesson on all the cars in the facility. The tour behind the āwallā wasnāt what I was expecting cause of OSHA standards didnāt allow us to fully walk back in the workshop. Funny thing though, the lady said from beginning to end a customers car usually takes 120 days to get doneā¦give or take a month or 2Not sure of your source but I dont think its totally accurate. Carroll did not like the idea of any Mustang in the shop, Secretaries car as you all heard. But Lee Iacocca didn't mince words and the project was never in doubt. Maybe Mr Shebly was the one who didnt like it
Going to follow up with one of the original guys to get the skinny
GT350 doesn't sound like any American V8 I have ever heard.Just a mustang with a comprised flat crank design because Ford wanted it to sound like American made V8s. I ponder why the GT3 and GT4 mustangs do not use the flat crank Gt350 engine.