Oil pressure after Roush Phase 2 install

[FUN2RIDEFAST]

I've had the supercharger on since late November and am running Amsoil 5w50 full synthetic as it's what Brenspeed uses. I installed new oil pump gear at the time of installation. My oil pressure gauge is reading close to sixty pounds at 2500 rpm and that seems high. These cars hold a lot of oil so I made sure it was up to temp. To be honest I didn't pay much attention to the oil pressure prior to the supercharger install.

Sponsored

 

[Avispa]

Your new pump gears probably fit tighter in the pump housing. If you didn't change the pressure relief spring, I wouldn't worry about it.

 

[FUN2RIDEFAST]

Your new pump gears probably fit tighter in the pump housing. If you didn't change the pressure relief spring, I wouldn't worry about it.

Brenspeed took care of the entire installation and I don't believe they changed the spring. Thanks for the feedback.

Sponsored