Official: HRE FlowForm FF15 - Final details and fitting pics!

[FlowForm_Wheels]

Most of you saw the number of images from our SEMA debut of the FF15 on the Cortex Mustang and the Gibson Exhaust Mustang. Now is time to follow up with the official tell-all with all information in one post.

First order of business are the official fitments.

Also note all of these are made to the Mustang specific hub bore of 70.6...

Sponsored

 

[FlowForm_Wheels]

So far we only have the weight of the 20x10 and 20x11 as those are the wheels we were able to get for SEMA.


The 20x10 FF15 weighs in at only 24.2 lbs, and the 20x11 only 24.8 lbs. To put it into reference, the much smaller 19x9 and 19x9.5 GT PP wheels weigh in at a hefty 32.6 lbs and 33 lbs respectively. That’s dropping almost 9 lbs per corner AND going up a good amount in diameter and width. Most importantly though, these wheels are the expected HRE quality and strength/reliability.
[FONT=&quot]
Of course the 19” and 18” will be even lighter!

[/FONT]

 

[FlowForm_Wheels]

[FONT=&quot]Let’s not forget either, one VERY important mission we had was to make sure our two 18” “track” sizes would clear the GT PP massive 6POT 380mm Brembo brakes. Mission accomplished!

[/FONT]

 

[FlowForm_Wheels]

As some of you know I received my 2015 Mustang GT PP a couple weeks ago and just had some work done last week by the finest in SoCal: HG Motorsports. Prior to that, I of course had to fit my very own set of 20" FF15 on the car wrapped in ultra-sticky and over-sized TOYO R888.


Sizes Front: 20x10 et40 with R888 285/35 20
Sizes Rear: 20x11 et55 with R888 315/30 20


[FONT=&quot]As you can see from the images, even with the oversized R888, we still have about 8mm clearance inboard to the strut and are good outboard. You will also see that there is good caliper to spoke clearance – that is one of the massive OEM 22mm lug nuts in between.

[/FONT]

 

[FlowForm_Wheels]

More professional pics to come next week of my car that is shown above!

For variety again are the Cortex car with FF15 finished in FOG and the Gibson car in Tarmac...

 

[FlowForm_Wheels]

and another...

 

[GetYourWheels]

Wow, really loving that new style.
The 18"s clearing the PP brakes is impressive.

Great work guys!

 

[jayman33]

Those.are.awesome.

/end

 

[FlowForm_Wheels]

Wow, really loving that new style.
The 18"s clearing the PP brakes is impressive.

Great work guys!

Those.are.awesome.

/end

Thanks guys! Can't wait to share some pro pics after next week.

 

[Diode Dynamics]

Those are unbelievably good looking!

Looking forward to seeing the pro pictures!

Nick C.

 

[FlowForm_Wheels]

Those are unbelievably good looking!

Looking forward to seeing the pro pictures!

Nick C.

Thanks Nick, we are pretty proud of them as well. ;)

 

[Todd15Fastback]

OMG...That 315/30 on the back...Drooling.

 

[rcb020]

Awesome! Any plans to have the FF01 in 18" and 19" with Mustang fitments?

 

[FlowForm_Wheels]

OMG...That 315/30 on the back...Drooling.

Awesome! Any plans to have the FF01 in 18" and 19" with Mustang fitments?

Not at this point, but more than likely I see us adding at least the 19" to FF01 at some point.

 

[MustangCollector]

Hi Flowform , these look awesome do you offer the same sizes and fitment options for your mesh styled wheel as well?
Also when will the 19 inch versions of your wheels for the 2015 Mustang become available? I love the look of the 20 but the extra weight and the tire i am certain the 19's will make the car stop and handle much better with reduced weight.

looks you you guys got the offsets dead on for aggressive fitments and most 1 piece wheels on the market will not be able to be offered as such which makes me wants these Flowforms even more.

cant wait to see more photos.

Sponsored