Nguage tire size/axle ratio

[BevsTTs550]

I’m using a nguage on my 2020 and it doesn’t display the page to adjust tire size or gear ratio, it’s just blank.
It says 5 blocks 0 parameters, hit next to continue then blank screen.
Can anyone confirm this may not be available on the nguage for 18+?
Thanks

Sponsored

 

[Jackson1320]

You don’t need to do this. The car will learn on its own

 

[BevsTTs550]

You don’t need to do this. The car will learn on its own

Thanks but that’s not my question, I switch between drag wheels and street often so even if learning is a possibility it’s not gonna happen quick enough. I had one set on for weeks and was still of by 10mph.

 

[Cory S]

Thanks but that’s not my question, I switch between drag wheels and street often so even if learning is a possibility it’s not gonna happen quick enough. I had one set on for weeks and was still of by 10mph.

10mph? What tire size or gear change have you made?

 

[m3incorp]

Is the nguage married to your car? If no luck, you can buy a ForScan tool for about $30 or so and make the adjustments.

 

[BevsTTs550]

Is the nguage married to your car? If no luck, you can buy a ForScan tool for about $30 or so and make the adjustments.
[/QUOTE
Yes, I was looking at that option, I think that’s the way to go but just found it odd that the nguage wouldn’t do this but works on earlier models, 17 back.

 

[BevsTTs550]

Yes, I was looking at that option, I think that’s the way to go but just found it odd that the nguage wouldn’t do this but works on earlier models, 17 back.

 

[BevsTTs550]

10mph? What tire size or gear change have you made?

I go back and forth from a Toyo 26.3” overall diameter to a Mickey ET Street R 29.4

I notice it on my Dragy runs when it says “150” and Speedo’s reading about 140.

 

[BevsTTs550]

Correction. My 305/45 Mickey is 28.1 my 315/50’s are 29.4

 

[tnk_2]

You don’t need to do this. The car will learn on its own

So, if I change any tire size the car will learn on its own?
What about rims size?

 

[m3incorp]

It is the total diameter that matters. The car will not learn on it's own, once a certain threshold is crossed. You will have to calibrate the speedo in those instances.

So, if I change any tire size the car will learn on its own?
What about rims size?

Sponsored