My 16' base GT doesn't have the undertray flap below the oil filter, does yours?

[Coconut]

All the DIY S550 GT oil change Youtube videos show a convenient undertray flap held in by one 7mm bolt providing easy access to the oil filter. Just did my first oil change and noticed I didn't have this flap. I had to remove the plastic undercover which was held on by 6 screws. Does your car have the flap or solid cover underneath?

Sponsored

 

[Niz55]

That is only for pp gt cars.

 

[Coconut]

That is only for pp gt cars.

I see, thanks for confirming.

 

[BmacIL]

It's actually a good idea to get the PP underside K-brace and the new tray with the flap. I put this on about a year ago. Not too expensive, or difficult, either.

 

[Coconut]

It's actually a good idea to get the PP underside K-brace and the new tray with the flap. I put this on about a year ago. Not too expensive, or difficult, either.

How much would that run and is that new or off a wrecked car?

 

[Niz55]

I also have the complete setup. Pp lip, both under tray and the brace.

Came out to $350

 

[melwff]

That flap and brace also come with non-PP when you order the 20" wheels.

 

[2015Etrac]

That flap and brace also come with non-PP when you order the 20" wheels.

I'm glad I read this. I was about to order the above setup. I have the factory 20in wheel option. I'll have to double check to see if I have this.

 

[Dr. Norts]

I'm glad I read this. I was about to order the above setup. I have the factory 20in wheel option. I'll have to double check to see if I have this.

No need to double check. If your car was ordered with the 20" wheel option it has it.

 

[1380KPOI]

:amen:

I'm glad I read this. I was about to order the above setup. I have the factory 20in wheel option. I'll have to double check to see if I have this.[/QUOTE

Why would you not "LOOK" at what you have underneath your car first before attempting to order this set up???

 

[VIPR01]

Anyone have a Part No/Stock ID for the above setup?

 

[Rebellion]

https://www.mustang6g.com/forums/showthread.php?t=100800

Instructions and part number in the above thread.:cheers:

 

[VIPR01]

Thanks for the info

Sponsored