Mustang GT PP1 Belly pan ?

[canyon ed]

What does it take to install a PP1 belly pan on a Non PP1 GT? Has anyone done it, any ideas of help would be great.

Sponsored

 

[90Notch]

What does it take to install a PP1 belly pan on a Non PP1 GT? Has anyone done it, any ideas of help would be great.

You can do it. There are threads on here with info and part numbers. I think most just go aftermarket splitter though.

 

[canyon ed]

You can do it. There are threads on here with info and part numbers. I think most just go aftermarket splitter though.

Any links?

 

[90Notch]

https://www.mustang6g.com/forums/threads/anyone-have-2018-rtr-chin-spoiler.111446/

Try that one. Otherwise, you can search using the magnifying glass in the upper right hand corner.

 

[canyon ed]

https://www.mustang6g.com/forums/threads/anyone-have-2018-rtr-chin-spoiler.111446/

Try that one. Otherwise, you can search using the magnifying glass in the upper right hand corner.

Thanks and if anyone has done this conversion on a 17 GT premium please chime in W/ details.

 

[Lime1GT]

One note of warning on the belly pans before you buy. If you have a tendency to drop things in the engine compartment like fasteners, wrenches or whatever you will have to jack the car up and remove some fasteners to get the pieces back. They no longer fall to the floor. This is a pain in the butt as I've dropped a couple of things now and it's quite the job of retrieval.

 

[Allentown]

Don't forget to trim in the brake cooling ducts unless you buy the PP wheel liner also. A pair of snips solves the problem.

Sponsored