Mach 1 Rear-wheel lip molding part number

[scoots]

When I searched, I found the part number for the front molding, but not the rear-wheel molding. Does anyone have the Ford part number for it? I am looking to add it to my 2019 GT.

Thank you,

Scott

Sponsored

 

[Schwerin]

I'd love part number as well, and for the rear rock guards, they look noticeably bigger than the PPL2 ones.

 

[scoots]

I dug around on Tasca and found these listed for the 2020 GT500s:

2015-2020 Ford Mustang Mud Guard FR3Z-6328370-A | TascaParts.com
2015-2020 Ford Mustang Mud Guard FR3Z-6328371-A | TascaParts.com

It looks like Levittown sells the same part numbers as a kit, but does note that a small modification is needed if the GT350 rear valance is not used.

Genuine Ford Splash Guard Kit - Rear - SPLSHGRDKIT | Levittown Ford (levittownfordparts.com)

 

[scoots]

Looks like alternate part numbers for the GT500 are:

kr3v-6328370-aaw
kr3v-6328371-aaw

 

[EVL-S550]

When I searched, I found the part number for the front molding, but not the rear-wheel molding. Does anyone have the Ford part number for it? I am looking to add it to my 2019 GT.

Thank you,

Scott

Whats the part number for the front?

 

[melwff]

Whats the part number for the front?

Here it is
https://accessories.ford.com/moulding-12786.html#2021/Mustang

 

[melwff]

I just completed installation of the rears on my non-HP Mach 1. Took about 20 minutes per side. Jacked up one side of the rear to get additional clearance. Popped the three plastic retainers that hold the wheel well liner and moved it out of the way. Removed two existing screws that hold side of bumper. Installed two screw clips into existing holes, located molding pin into existing hole, replaced original screws plus two new ones, replaced liner into original position, reinstalled original three plastic retainers plus one new one. Only tools used were small screwdriver and 1/4" ratchet with short extension and socket.

 

[wilkinda65]

Here it is
https://accessories.ford.com/moulding-12786.html#2021/Mustang

Mine were in back order since February. I finally gave up waiting and cancelled

 

[melwff]

Mine were in back order since February. I finally gave up waiting and cancelled

I had a similar issue with the rear pieces. One side had an issue being delivered to the dealer. Ordered May 3rd , the dealer reordered on July 6th, and finally placed an urgent order and it came in a few days later. Similar to problems with new cars the parts system is also having issues.

 

[Ctodd1]

Now the rear splash guards ( one side) is on national backorder into 2022.
What use is one?
Someone posted that the GT500 rear splash was the same splash with different part numbers.
Has anyone had any luck getting them lately?

 

[melwff]

Now the rear splash guards ( one side) is on national backorder into 2022.
What use is one?
Someone posted that the GT500 rear splash was the same splash with different part numbers.
Has anyone had any luck getting them lately?

They are the same and use the same part number. I installed them prior to the parts shortage.

 

[S550VIN54]

They are the same and use the same part number. I installed them prior to the parts shortage.

Can you post some pics of it on the car? Thanks!

 

[melwff]

Can you post some pics of it on the car? Thanks!

 

[S550VIN54]

Just realized yours is a non-HP. I was thinking these were extended for more protection.

 

[dhborden]

Looks like alternate part numbers for the GT500 are:

kr3v-6328370-aaw
kr3v-6328371-aaw

FYI, those part numbers bring up the adjustable strut mounts.

Sponsored