Mach 1 fender flares

[LSchicago]

Nice, but do they make all 4? I need them more for the rear.

Sponsored

 

[Whitedevil95]

Subbing to see outcome

 

[Cobra Jet]

Nice, but do they make all 4? I need them more for the rear.

The M1 with handling package only has those flares on the front.

 

[LSchicago]

The M1 with handling package only has those flares on the front.

It would be nice if they made rear ones.

 

[Charlemagne]

There's oem rear splash guards instead which are used on GT350 and Mach 1 with HP:
https://www.mustang6g.com/forums/threads/gt350-rear-splash-guards.36892/page-5#post-994892

 

[Cobra Jet]

There's oem rear splash guards instead which are used on GT350 and Mach 1 with HP:
https://www.mustang6g.com/forums/threads/gt350-rear-splash-guards.36892/page-5#post-994892

Yes, they have been around for a bit - but looking at the side and profile of the S550, once the front M1 flares are installed, the rear (even with the GT350 guards) still looks awkward. The front M1 flares encompass the entire fender opening, the rears don't.

They should make a matching rear set like the fronts... no?

 

[Atlas1]

Yes, they have been around for a bit - but looking at the side and profile of the S550, once the front M1 flares are installed, the rear (even with the GT350 guards) still looks awkward. The front M1 flares encompass the entire fender opening, the rears don't.

They should make a matching rear set like the fronts... no?

I spoke with air design USA which is the manufacturer of the fronts and they have no interest in making a set for the rear unfortunately

 

[Charlemagne]

@Cobra Jet It looks fine to me the way it is on the HP. I plan to import them for my Mach 1, they'll come in handy for wider tyres

 

[TonyNJ]

Yup I got them. Oem Mach 1 fender flares. Took a month to get them in from my Ford dealer. Shout out to Zach @Peoria Ford here in Az for hooking me up.
I have a 15’ with a roush kit, gt500 rockers, and gt350 rear valance. So we will see what needs to be done for fitment. Bare with me as I will have to wait a few days to install them. My car has bowed out front fenders from the previous owner bagging the car with the wheels turned to one side (bastard) Im waiting on paintless dent removal to be completed. Until then I took some pics of the flares.

So here's how it worked out on a '19 PP1...

Out of the 5 push pin locations, 2 were a perfect match. The 3 fronts needed either splice brackets or a new hole drilled. Used a piece of leftover fender flare plastic for the splices. In the end... it's a great fit. I ordered some $25 winglets from AM to fill that 3.5" void up front. This mod is purely cosmetic at this point. However, it will definitely cover some PP2 wheel poke and cover other wide offset wheels.

 

[TonyNJ]

Subbing to see outcome

I posted an outcome...

 

[TonyNJ]

It would be nice if they made rear ones.

The fronts can be easily installed on the rears with minor fabrication. I just tried a hand fit and it's totally doable.

 

[TonyNJ]

I spoke with air design USA which is the manufacturer of the fronts and they have no interest in making a set for the rear unfortunately

The fronts can be fitted to the rear. I just tried a hand fit. If they weren't $295 a set, I would probably buy another pair and install them. I'm sure the price will drop in the future

 

[Grabber Lime]

awesome i will be doing this

 

[Bruce 8858]

Yup I got them. Oem Mach 1 fender flares. Took a month to get them in from my Ford dealer. Shout out to Zach @Peoria Ford here in Az for hooking me up.
I have a 15’ with a roush kit, gt500 rockers, and gt350 rear valance. So we will see what needs to be done for fitment. Bare with me as I will have to wait a few days to install them. My car has bowed out front fenders from the previous owner bagging the car with the wheels turned to one side (bastard) Im waiting on paintless dent removal to be completed. Until then I took some pics of the flares.

 

[Bruce 8858]

Yup I got them. Oem Mach 1 fender flares. Took a month to get them in from my Ford dealer. Shout out to Zach @Peoria Ford here in Az for hooking me up.
I have a 15’ with a roush kit, gt500 rockers, and gt350 rear valance. So we will see what needs to be done for fitment. Bare with me as I will have to wait a few days to install them. My car has bowed out front fenders from the previous owner bagging the car with the wheels turned to one side (bastard) Im waiting on paintless dent removal to be completed. Until then I took some pics of the flares.

Just got mine installed Saturday at the dealership. I also got the splitter too. I took that home in the box. It would have been about 4 1/2” off the ground if they had installed it. Took them about 3 hours just to install the fender flares. They had to remove both tires.

If it hadn’t been for me finding out about the splitter and flares on this website I would have never got them from the dealer. I called Ford performance and had them CC an email to the GM at the dealership. Couldn’t say too much when he got it. They had installed mine on another car that was sold the week before. SMH

Sponsored