Sponsored

Joleobee magnetic nGauge Mount

kluke15

Well-Known Member
Joined
Aug 17, 2016
Threads
45
Messages
808
Reaction score
372
Location
Reno, NV
First Name
Kenny
Vehicle(s)
2017 Mustang GTPP
The Joleobee mount is really nice. We've sold a ton of them since they were released and have only gotten excellent feedback on them. You do need to remove the dash panel for the initial install. We always have these in stock too so if you have any questions or would like to pick one up give us a shout.

https://www.lethalperformance.com/joleobee-ngauge-mount-for-2015-mustangs.html
ngaugemount2.jpg
quick question...are these angled at all? the ngauge gets bad glare if at the wrong angle and you cant see anything. current one im running is angled but it clamps the ngauge into the dash. it does ok but this this is better if it was angled.
 

Sponsored

olaosunt

Well-Known Member
Joined
Jan 10, 2015
Threads
71
Messages
4,284
Reaction score
1,559
Location
Indiana
Vehicle(s)
Guard,base,M6,KB-2.DIB,auto,Hellion TT,2016 GT 350/Gen 3 Whipple ,2018 Mustang GT/Gen 5 Whipple
Here is mine in steering column mount
Pops right out and secured when in.
It blocks the water temp gauge but you have a better one in the Gauge.
22EDBBEE-0667-4044-B30F-C2823493F260.jpeg
 

TLW1022

Well-Known Member
Joined
Mar 17, 2019
Threads
3
Messages
111
Reaction score
99
Location
Coconut Creek FL
First Name
Terry
Vehicle(s)
2019 Bullitt K3464
You have to get the gauge bezel out to get to the air register
No instructions are included & nothing is on the web site
They did not respond to my questions about installation

This is the video that shows how to get bezel out, tilt the steering wheel down to have room to get bezel out


Skip the steering wheel removal

Its not hard but does take some time
Very happy with the outcome


Dash nguage.jpg
dash ngauge 2.JPG
 
Last edited:
OP
OP
chesster51

chesster51

Well-Known Member
Joined
Sep 26, 2019
Threads
35
Messages
296
Reaction score
61
Location
Middleburg, FL
First Name
Rick
Vehicle(s)
2019 Bullitt
Vehicle Showcase
1
You have to get the gauge bezel out to get to the air register
No instructions are included & nothing is on the web site
They did not respond to my questions about installation

This is the video that shows how to get bezel out, tilt the steering wheel down to have room to get bezel out



Its not hard but does take some time
Very happy with the outcome


Dash nguage.jpg
dash ngauge 2.JPG
Thanks for posting, I like it. Wow, that's a lot of dash removal! How much air do you get out of the vent? I see you went "warranty be damned" and got the flex tune. I'm trying like hell to hold off, but I know I wont last much longer. How do you like the tune? Are you running E85 full time?
 

coreystang

Well-Known Member
Joined
Nov 3, 2017
Threads
7
Messages
101
Reaction score
55
Location
71037
Vehicle(s)
2015 Mustang GT

TLW1022

Well-Known Member
Joined
Mar 17, 2019
Threads
3
Messages
111
Reaction score
99
Location
Coconut Creek FL
First Name
Terry
Vehicle(s)
2019 Bullitt K3464
Thanks for posting, I like it. Wow, that's a lot of dash removal! How much air do you get out of the vent? I see you went "warranty be damned" and got the flex tune. I'm trying like hell to hold off, but I know I wont last much longer. How do you like the tune? Are you running E85 full time?
Air flow is not bad, the air hits your hand on the steering wheel. The back register vents stay there so I ran the ngauge wire through them so the slats would stay straight & not flop to one side or the other to stay open.
I use my car for work & being in south Florida where we have summer 9 months out of the year, so there was no way I was giving up a air vent!!!
I have never run the dedicated e85 tune but have been very happy with the flex tune, I don't have to worry about finding E85. I drive @ 100+ miles a day, I would have to fill up constantly running straight E85. I usually run @ 30-60% blend, normally run 89 octane during the week & have never had positive knock
 

Sponsored

TLW1022

Well-Known Member
Joined
Mar 17, 2019
Threads
3
Messages
111
Reaction score
99
Location
Coconut Creek FL
First Name
Terry
Vehicle(s)
2019 Bullitt K3464

BmacIL

Enginerd
Joined
Sep 21, 2014
Threads
69
Messages
15,010
Reaction score
8,921
Location
Naperville, IL
Vehicle(s)
2015 Guard GT Base, M/T
Vehicle Showcase
1
So where's the actual magnetic mount?
 

Sighlense

Well-Known Member
Joined
Mar 29, 2016
Threads
21
Messages
571
Reaction score
94
Location
Upstate NY
Vehicle(s)
2015 Magnetic GT/PP
I'd be all over this but you're just asking for an annoying squeak coming from somewhere in the dash or glove box area. Not sure that's worth it for me.
 
 




Top