J&M Products / Hotpart.com Newest Parts - MagneRide Specific Stainless Steel PTFE Lined Brake Hoses

[Hotpart.com]

2018-Present Ford Mustang With MagneRide Front & Rear Stainless Steel Brake Hose Kit​

J&M Products direct fit D.O.T. certified PTFE lined brake hoses. These brake hose assemblies use true OEM style direct replacement non-universal fittings to achieve proper factory hose routing and fitment. Expansion of stock rubber hoses causes a spongy brake pedal feel and loss of initial braking force. Installation of our PTFE-lined stainless steel hose assemblies will give your car a firmer pedal, quicker braking response, and easier brake modulation. Hoses are tested to 3000 psi to guarantee a leak free hose assembly. Best of all these are made by J&M Products right here in the USA.
Stainless Steel Features and Benefits:

• Direct OEM Fit each fitting is of OE design so NO adapters are necessary.
• No volumetric expansion (hose swelling) for powerful braking and amazing ‘feel’
• Suitable for all applications including extreme racing.
• Exceeds the latest DOT standards backed up by independent laboratory reports.
• Trivalent zinc plating exceeds DOT salt spray test.
• Design allows high temperature operation and longer life.
• Every hose is pressure tested to 3000 psi. (207 Bar)
• Quicker brake response. Better brake modulation.
• Every hose is stamped with U.S. DOT registered number.
• Clear Outer protective covering.

Fits: 2018, 2019, 2020, 2021
Fits: 2018-2021 – Ford Mustang GT & Ecoboost With MagneRide Suspension

Sponsored

 

[Smunczen]

I add those to my buy list.

 

[KermiStang]

2018-Present Ford Mustang With MagneRide Front & Rear Stainless Steel Brake Hose Kit​

J&M Products direct fit D.O.T. certified PTFE lined brake hoses. These brake hose assemblies use true OEM style direct replacement non-universal fittings to achieve proper factory hose routing and fitment. Expansion of stock rubber hoses causes a spongy brake pedal feel and loss of initial braking force. Installation of our PTFE-lined stainless steel hose assemblies will give your car a firmer pedal, quicker braking response, and easier brake modulation. Hoses are tested to 3000 psi to guarantee a leak free hose assembly. Best of all these are made by J&M Products right here in the USA.
Stainless Steel Features and Benefits:

• Direct OEM Fit each fitting is of OE design so NO adapters are necessary.
• No volumetric expansion (hose swelling) for powerful braking and amazing ‘feel’
• Suitable for all applications including extreme racing.
• Exceeds the latest DOT standards backed up by independent laboratory reports.
• Trivalent zinc plating exceeds DOT salt spray test.
• Design allows high temperature operation and longer life.
• Every hose is pressure tested to 3000 psi. (207 Bar)
• Quicker brake response. Better brake modulation.
• Every hose is stamped with U.S. DOT registered number.
• Clear Outer protective covering.

Fits: 2018, 2019, 2020, 2021
Fits: 2018-2021 – Ford Mustang GT & Ecoboost With MagneRide Suspension

Are there any coupon discounts running?

 

[Hotpart.com]

Yes you can use code "Mustang 6g" for a 5% discount.

 

[TeeLew]

I've got these lines (and love them), but now I'm changing over to bigger calipers. What size crush washers do you use? I want to get a bunch of freshies on hand.

 

[Hotpart.com]

We have them made to our specification but any thick M10 crush washer should work. If you can't find any PM us with your address and I can have shipping send some out for you.

 

[TeeLew]

We have them made to our specification but any thick M10 crush washer should work. If you can't find any PM us with your address and I can have shipping send some out for you.

Thanks for the response and offer. I've got 50 M10x18x2.0 crush washers on the way for less than $10, so I'm good.

 

[GTP]

Thanks for the response and offer. I've got 50 M10x18x2.0 crush washers on the way for less than $10, so I'm good.

@TeeLew
Hey Tim, source for these?

Sponsored